Perhaps the card autodetection didn't work well (it happens to me with the FlyVideo II). You should load the bttv module with the option card=54 for FlyVideo 2000 and with card=65 for FlyVideo 2000s (the full list is in the kernel documentation: Documentation/video4linux/CARDLIST.bttv.gz)
On Tuesday 05 October 2004 22:04, Shlomo Solomon wrote: > I sent this 14 hours ago and it didn't reach the list so here's anoher try. > > Hi, > > I have what MAY be a related problem with XawTV, so I'll try to take > advantage of Amichai's question to possibly solve my problem too. > > I have a FlyVideo2000 TV card. I was not able to configure it properly. But > I discovered that I could use an old VCR as an improvised "MEMIR". What I > mean is that when I connect the TV card's antenna sockket directly to the > HOT wall outlet, I get nothing, but if I put the VCR in the middle (i.e I > connect the FlyVideo2000 to the VCR's RF out socket and the VCR's antenna > socket to the wall socket), I can now choose channels using the VCR remote > control. > > On Tuesday 05 October 2004 01:43, Amichai Rotman wrote: > > Hi All, > > > > Any of you succeeded in creating /configuring XawTV to work with an > > analogue broadcast from HOT (cable)? > > > > I have the Freq Table, but I am not sure how to create the file and I > > noticed Israel isn't listed in the scantv tables... > > > > Any HOWTO / pointers? > > > > Thanks ! > > > > Amichai. > > > > ================================================================= > > To unsubscribe, send mail to [EMAIL PROTECTED] with > > the word "unsubscribe" in the message body, e.g., run the command > > echo unsubscribe | mail [EMAIL PROTECTED] -- Haggai Eran [EMAIL PROTECTED] ================================================================= To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
