On Fri, Nov 07, 2003 at 11:08:52AM +0200, John Rabkin wrote:
>
> Thanks for the heads up, no joy getting any of the drivers included in
> the NUT package to work though.
>
Script started on Fri Nov 7 13:59:42 2003
$ /bin/upsc [EMAIL PROTECTED]
battery.charge: 113.5
driver.name: powercom
driver.parameter.manufacturer: Advice
driver.parameter.modelname: Partner/King_PR750
driver.parameter.port: /dev/ttyS0
driver.parameter.serialnumber: 00131581
driver.parameter.type: Trust
driver.version: 1.5.6
input.frequency: 48.60
input.voltage: 228.6
input.voltage.nominal: 230
output.frequency: 49.10
output.voltage: 228.6
ups.load: 26.0
ups.mfr: Advice
ups.model: Partner/King_PR750
ups.model.type: Trust
ups.serial: 00131581
ups.status: OL
$ exit
exit
Script done on Fri Nov 7 13:59:57 2003
$
The only flew I can point to is that battery.charge is reported to be
113.5. How did you configure the NUT? What version are you using? What
gets reported in the log file? Do try the driver with debugging
information on, -DDDDD or something similar, I believe it is mentioned
in the man page.
It could be that there are similar versions for the serial cable. Do
ask Advice about it. If you can get the schematic of the cable and post
it on this list it would be great.
--
Shaul Karl, shaulk @ actcom . net . il
=================================================================
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
