Hi, I replaced my gateway machines few days ago, and everything seems to be ok, with a small problem.
I get this error in syslog: Oct 5 11:07:41 witch kernel: eth0: Too much work at interrupt, IntrStatus=0x0040. I searched google a bit and people say it's an IRQ conflict issue - which is not the case here - : root]# cat /proc/interrupts | grep eth 9: 5410537 XT-PIC eth0 12: 2554281 XT-PIC eth1 Another thread told me to look at vmstat 10 output (I don't know much about vmstat - but here's the output when the machine is idle..) procs memory swap io system cpu r b w swpd free buff cache si so bi bo in cs us sy id 0 0 0 13644 28668 150732 238844 0 1 59 55 233 207 1 1 98 When the machine is really busy (burning cd's for example) the "in" jumps up to 3000 btw... I can stream movies without problems through the network (using smb), but when I do thing like md5sum on iso's or burning cd's - at the end of the job (when an output should appear - e.g. output of md5sum for example) - the ssh session get stuck - either in windows (putty, secureCRT) or in Linux (konsole, vt).. Suggestions? Thanks, Hetz ================================================================= To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
