Official Flamer/Cabal NON-Leader wrote:
Quoth Erez Doron:
Attached scsi tape st0 at scsi2, channel 0, id 3, lun 0
yes, seems you do have it.
when i access /dev/st0, it automatically loads the st driver. ...
but still i get :
root]# mt -f /dev/st0 rewind
/dev/st0: No such device
can you send out lsmod, /proc/scsi/scsi, etc.
this is peculiar.
root]# lsmod
Module Size Used by Not tainted
st 29108 0 (autoclean)
ftape 124840 0 (autoclean) (unused)
loop 11024 0 (autoclean)
ppp_deflate 4032 2 (autoclean)
zlib_deflate 21344 0 (autoclean) [ppp_deflate]
ppp_async 8256 1 (autoclean)
ppp_generic 24108 3 (autoclean) [ppp_deflate ppp_async]
slhc 6508 1 (autoclean) [ppp_generic]
soundcore 6692 0 (autoclean)
eepro100 20336 1
ide-scsi 9664 0
ide-cd 30272 0
cdrom 32192 0 [ide-cd]
lvm-mod 65184 5
raid5 19520 1 (autoclean)
xor 7428 0 (autoclean) [raid5]
usb-uhci 24484 0 (unused)
usbcore 73152 1 [usb-uhci]
ext3 67136 4
jbd 49400 4 [ext3]
FastTrak 96996 4
sd_mod 12864 8
scsi_mod 108576 4 [st ide-scsi FastTrak sd_mod]
root]# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: Promise Model: 1X2 Mirror/RAID1 Rev: 1.10
Type: Direct-Access ANSI SCSI revision: 02
=================================================================
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
