On Thu, 2002-11-07 at 15:14, [EMAIL PROTECTED] wrote: > > Hi, > > I bought a no-name USB camera after being assured by the dealer that it has > LINUX support. The dealer supplied me with a LINUX module but when trying to > install it, I got the following:
A couple of comments/suggestions: 1. You're using a very old kernel. You have much better chance to get the camera to work with a newer kernel. 2. You seem to have the sources for kernel version 2.4.8-26mdk isntalled but you are running kernel version 2.4.8-34.1mdk. You should compile the module against the same kernel you're running. So basically my suggestion is - grab the latest kernel from the usuall mirrors, compile and install it and then try again with the sources. There exist a very good howto on kernel compiling (good for "linux kernel compile howto") and you can feel free to ask questions (both on and off the list) regarding compiling it if you after reading it something is still not clear. Good luck! Gilad. -- Gilad Ben-Yossef <[EMAIL PROTECTED]> http://benyossef.com "Geeks rock bands cool name #8192: RAID against the machine" ================================================================= To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
