you could try mii-tool, comes with RH and probably any major distribution.
Katriel -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Skliarouk Arie Sent: eai u?e 30 noeiao 2002 10:29 To: [EMAIL PROTECTED] Subject: How to disable 10/100 MBit autodetection Hello, I'm trying to connect intel 10/100 MBit to 10 mbit transceiver that is connected to AUI connector (anybody remembers those?) on an old router using cross ethernet cable. For some reason connection can not be established (connection LED on network card is off) and I suspect that 10/100 autodetection is the guilt. (From my experience 10/100 autodetection does not work well in Linux). So the question is: how to change network card settings (if possible): speed (10,100,auto), duplex (full, half, auto). --- Bye, | Fax: (972)-2-6796453 Arieh | Phone: (972)-6795364 ================================================================= To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED] ================================================================= To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
