Hi, On Wed, Jul 10, 2002 at 05:03:47PM +0300, Yedidyah Bar-David wrote: > Hello, > > Sorry for being off-topic. > > Did anyone here try wake-on-lan and cares to share the experience? > > Specifically, I have machines that wake up well usually, after > being shutdown by software or by the front-panel power button, > but not after turning off and on the button in the power supply, > or, more importantly, after an electricity break.
Usually modern BIOS have a configuration option like "After Power Failure" on i810 which has 3 options: - Stays Off - Last state - Power On Using this option you can address your problem. > > For those interested, I use ether-wake from > <http://www.scyld.com/expert/wake-on-lan.html>. > > Do others have better experience? Am I expecting something > impossible from the supply/card/board? > > Thanks, > > Didi > > > ================================================================= > To unsubscribe, send mail to [EMAIL PROTECTED] with > the word "unsubscribe" in the message body, e.g., run the command > echo unsubscribe | mail [EMAIL PROTECTED] -- Best regards. Michael Rozhavsky Tel: +972-4-9936248 [EMAIL PROTECTED] Fax: +972-4-9890564 Optical Access Senior Software Engineer www.opticalaccess.com ================================================================= To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
