Shachar, and your point? When I was working at Magnifire, I was putting boards into 1U cases, so of course it can be done, but as I wrote - you WILL loose some functionality (only 1 PCI card can be used - with a converter), and not all of the ATX boards can be fit - specially the Pentium 4 based, which got a really big fan on top of the P4 processor..
Hetz On Saturday 22 June 2002 13:17, Shachar Shemesh wrote: > Hetz Ben Hamo wrote: > >Do you REALLY think you can just throw your ATX board into 1U and thats > > it? > > > >Physically you can do it of course, but that means you'll have to > > sacrifice all your AGP & PCI slots (minus 1 which can be used with a > > converter to put the card horizontal), and you'll have some serious > > heating problems - specially with boards that got a heat sink on their > > chipset (I'm not mentioning the fact that you cannot put a P4 based board > > on 1U since the fan itself is bigger then a 2U chassis).. > > > >Hetz > > > >On Friday 21 June 2002 16:07, Jonathan Ben-Avraham wrote: > >>Hello, > >>Does anyone know of a local manufacturer of 1u/2u rackmount cases > >> suitable for ATX motherboards? > >>Regards, > >> > >> - yba > > http://www.fiasco.org.il/pictures.html > > > > ================================================================= > To unsubscribe, send mail to [EMAIL PROTECTED] with > the word "unsubscribe" in the message body, e.g., run the command > echo unsubscribe | mail [EMAIL PROTECTED] ================================================================= To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
