I don't think so....
In the man page u can see :" COMMAND LINE
The names of the network interfaces on which dhcpd should listen
for broadcasts may be specified on the command line."
In the dhcpd init script u can the line:" daemon /usr/sbin/dhcpd
${DHCPDARGS}"
Thet start the daemon on a specific interface.
It is not part of the configuration, it is part of the daemon startup
process
Doron ofek
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]] On Behalf Of Ben-Nes Michael
Sent: Tuesday, June 04, 2002 1:54 PM
To: Katriel Traum; [EMAIL PROTECTED]
Subject: Re: DHCPD problem
Demn.
they sure forgot to mention it in the man :(
----- Original Message -----
From: "Katriel Traum" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, June 04, 2002 12:14 PM
Subject: RE: DHCPD problem
> I encountered the same problem.
> what you have to do is edit /etc/sysconfig/dhcp
> and set the DHCPDARGS to the interface or interfaces you want dhcpd to
> listen on.
>
> root@gw etc# cat /etc/sysconfig/dhcpd
> # Command line options here
> DHCPDARGS=eth1
>
> that way dhcpd will listen only on one interface, and you won't have
to
set
> up a "dummy" range on your other interface.
>
>
> -katriel
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On
> Behalf Of Ben-Nes Michael
> Sent: Tuesday, June 04, 2002 10:46 AM
> To: [EMAIL PROTECTED]
> Subject: DHCPD problem
>
>
> Hi All
>
> I have dificulty using DHCPD on Linux server (rh7.3) with 2 interfaces
>
> I found out the dhcpd require me to specify all the interfaces on the
> server to start even if i dont want to use ( in this example eth0 )
one
> of the interfaces.
>
> the HOWTO recomended me to enter this line for the unused eth0
>
> subnet 194.90.15.160 netmask 255.255.255.224 {
> }
>
> but then when I start to get "DHCP Discover" both interfaces send
"DHCP
> Offer" and the client which return "DHCP Request" to confirm get "DHCP
> NAK" from the eth1 while eth0 send "DHCP ACK".
>
> This result in endless retries.
>
> if I do "ifconfig eth0 down" all work and the client get its ip (
after
> i comment the eth0 enteries in the dhcpd.conf file )
>
> if I leave both interfaces up and fill the missing option in the
> 194.90.15.160 subnet the client succesfuly lease an ip from this
subnet
>
> here is the dhcpd.conf 4 yours inspection:
>
> default-lease-time 600;
> max-lease-time 7200;
>
> option domain-name-servers 192.168.0.1;
>
> subnet 192.168.0.0 netmask 255.255.255.0 {
> option subnet-mask 255.255.255.0;
> option broadcast-address 192.168.0.255;
> option routers 192.168.0.1;
> range 192.168.0.2 192.168.0.5;
> option domain-name "internal.co.il";
> }
>
> subnet 194.90.15.160 netmask 255.255.255.224 {
> }
>
>
> =================================================================
> To unsubscribe, send mail to [EMAIL PROTECTED] with
> the word "unsubscribe" in the message body, e.g., run the command
> echo unsubscribe | mail [EMAIL PROTECTED]
>
>
> =================================================================
> To unsubscribe, send mail to [EMAIL PROTECTED] with
> the word "unsubscribe" in the message body, e.g., run the command
> echo unsubscribe | mail [EMAIL PROTECTED]
>
>
=================================================================
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
=================================================================
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
