And if I use network boot ? :(
-----Original Message----- From: Jonathan Ben-Avraham [mailto:[EMAIL PROTECTED]] Sent: Tuesday, May 28, 2002 6:13 AM To: [EMAIL PROTECTED] Subject: Re: Strange 3com 3c905b card problem On Tue, 28 May 2002 [EMAIL PROTECTED] wrote: > Hi List, > > > > I'm trying to use a 3com 3c905b card with an old 10m hub. > > It seems that no matter what I do(force Half+10mb) that card still > prints out that he think that there is an duplex mismatch, and simply > unable to transmit anything. Disconnet the card from the hub. Restart the network /etc/rc.d/rc3.d/S10network stop/start Then reconnect the card to the hub We used to have an all 3Com network and we saw this problem a lot with the old hubs, especially with one series of 3x509's that were produced in 1987/8. - yba > > > > Any other machine connected to that hub automatically use 10baseT HD. > > > > Communication is possible, but 95% of the packets are lost. > > I tried to raise the debug level, but nothing really was there. > > > > however it works perfect with M$.... :-( > > > > Could it be a driver problem? > > > > Thanks, > > > > Ohad. > > -- EE 77 7F 30 4A 64 2E C5 83 5F E7 49 A6 82 29 BA ~. .~ Tk Open Systems =}------------------------------------------------ooO--U--Ooo------------{= - [EMAIL PROTECTED] - tel: +972.2.679.5364, http://www.tkos.co.il - ================================================================= To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
