Can you follow the following procedure (1) Have the system boot with the ISDN utilities disabled. (2) Manually issue the commands that the start up scripts would issue the concern the ISDN card and ISDN configuration.
Now what are the error messages that you get? It might help if you run the above procedure with the script command and post the typescript file. [19:26:52 tmp]$ zgrep -A10 '7.26. ' /usr/share/doc/isdnutils-doc/FAQ/i4 lfaq.txt.gz 7.26. trouble_unauthorizedcodechange: When HiSax starts, I get the error messages 'Approval certification failed, unauthorized source code changes'? Since the certification of the HiSax driver is only valid for unchanged source code, the source code is protected by a checksum. When you get this message, then either you have changed the source code yourself, or the author did not update the checksum when changing the source code (reason could be that the complete certification tests have not yet been run on the changed code). [19:27:03 tmp]$ > The following E-mail message was sent before Christmas, and there was no > response to it. > Now, that Christmas and the New Year are safely behind us, I'm resending > this message with the hope that there is now someone knowledgeable about > the problem. > Thanks, > --- Omer > ---------- Forwarded message ---------- > Date: Mon, 24 Dec 2001 23:55:47 +0200 (EET) > From: Omer Zak <[EMAIL PROTECTED]> > To: Linux ISDN <[EMAIL PROTECTED]> > Subject: NETjet PCI ISDN card under Mandrake 8.1/RedHat 7.2 > > Problem: > The hisax driver causes the system to get locked up when it tries to > initialize the card (at boot time). > Details: > Card - NETjet PCI, vendor e159, id 1 > It is recognized as HiSax type=20, and I use it with protocol=2. > The card works well under an old version of Linux (2.0.36, with > the corresponding ISDN driver and tools), and under Windows 2000. > > The immediate cause of the problem: > The driver claims that certification failed due to unauthorized source > code change (ISDN drivers are certified and protected against authorized > source code changes, so this protection is necessary). > > The versions of ISDN packages which I have installed (under Mandrake 8.1) > are: > isdn-light-0.8-8mdk > isdn4k-utils-3.1-1.pre1.9mdk > > I looked at the Mandrake cooker, and found that there is a more recent > version of isdn-light (isdn-light-0.8-9mdk) but isdn4k-utils stayed the > same. > There is also another version (fork?): isdn4k-utils-3.1b7-13mdk. > > Does anyone know what is going on, before I start a wild orgy of package > installation and uninstallation? > Thanks, > --- Omer > WARNING TO SPAMMERS: at http://www.zak.co.il/spamwarning.html > > > ================================================================= > To unsubscribe, send mail to [EMAIL PROTECTED] with > the word "unsubscribe" in the message body, e.g., run the command > echo unsubscribe | mail [EMAIL PROTECTED] > -- Shaul Karl email: shaulka(at-no-spam)bezeqint.net Please substitute (at-no-spam) with an at - @ - character. (at-no-spam) is meant for unsolicitate mail senders only. ================================================================= To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
