I have been trying on and off to get my TigerJet card to work with Linux for
ages.
Suse 6.4 claims to support the card, but I read somewhere (on a newsgroup or
forum, but I can't remember which one) that there are actually two types of
TigerJet card, apparently with different chipsets but the same name (I don't
remember the details) and that only one is supported by Linux. I, of course,
have the wrong one.
Daniel Baum - Systems Administrator
Millimetrix Broadband Networks
[EMAIL PROTECTED]
Tel. 03-9026522/350 Fax 03-9026520
> Hi,
>
> I've tried to intstall Telese PCI card which uses TigerJet/NetJet chipset.
> Unfortunatly I failed. The drivers loaded and initialized just fine.
> But when I tried to create some traffic the Kernel stuck.
> I tried to use it with SuSE 7.0 (Kernel 2.2.X).
>
> Alex Rier | ICQ: 96993521
> CEO | Tel: +972-52-442549
> Breakthrough Ltd. | FAX: +972-3-5364060
> http://www.sysadmin.co.il | mailto:[EMAIL PROTECTED]
>
>
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED]]On Behalf Of Shaul Karl
> > Sent: Wednesday, May 02, 2001 1:00 AM
> > To: [EMAIL PROTECTED]
> > Cc: [EMAIL PROTECTED]
> > Subject: Re: Tigerjet ISDN Linux support
> >
> >
> > > Hi - I've seen numerous posts from people trying to get their
> > Tigerjet isdn card (distributed by isdnnet) working with Linux.
> > Has anyone figured this out? I've just installed Mandrake 8.0 and
> > the wizard doesn't work with the Tigerjet. Any help would be much
> > appreciated.
> > >
> > > Thanks,
> > >
> > > Elan
> >
> >
> > I have not tried much but it might be that you should find out what
other
> > names this card have:
> >
> > [01:58:10 tmp]$ zgrep jet
> > /usr/share/doc/kernel-doc-2.2.19pre17/Documentation/i
> > sdn/*
> > /usr/share/doc/kernel-doc-2.2.19pre17/Documentation/isdn/README.Hi
> > Sax.gz:Traver
> > se Technologie NETjet PCI S0 card and NETspider U card
> > /usr/share/doc/kernel-doc-2.2.19pre17/Documentation/isdn/README.Hi
> > Sax.gz:Ovisli
> > nk ISDN sc100-p card (NETjet driver)
> > /usr/share/doc/kernel-doc-2.2.19pre17/Documentation/isdn/README.Hi
> > Sax.gz: 20
> > NETjet PCI card no parameter
> > /usr/share/doc/kernel-doc-2.2.19pre17/Documentation/isdn/README.Hi
> > Sax.gz: 20
> > NETjet PCI card no parameter
> > [01:58:18 tmp]$
> >
> > --
> >
> > Shaul Karl <[EMAIL PROTECTED]>
> >
> >
> >
> > ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
> > To unsubscribe, send mail to [EMAIL PROTECTED] with
> > the word "unsubscribe" in the message body, e.g., run the command
> > echo unsubscribe | mail [EMAIL PROTECTED]
>
>
> =================================================================
> To unsubscribe, send mail to [EMAIL PROTECTED] with
> the word "unsubscribe" in the message body, e.g., run the command
> echo unsubscribe | mail [EMAIL PROTECTED]
>
=================================================================
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
