On Sat, 3 Feb 2001, Eran Tromer wrote:
> Hello,
>
> I have a problem establishing an ADSL connection.
>
> I carried out the instruction in mulix's HOWTO. pptp seems to do fine,
> but ppp chokes with "ioctl(PPPIOCGFLAGS): Invalid argument".
> Log transcript attached below.
>
> Setup:
> - Orckit ATUR3
> - kernel 2.4.1 with PPP statically linked
> (also tried a 2.4.0test? with modular PPP, no change)
> - pptp-mulix-0.05.tar.gz
> - ppp-2.3.11-7.i386.rpm of RedHat 7.0
> (rebuilt locally with no change)
as far as i know, kernel 2.4 require ppp 2.4.0 ...
> - ADSL modem connected via uncrossed cable to NIC on eth1, telnet works
>
> Help will be appreciated.
>
> ------------------------------
> Feb3 16:43:11 lucian (unknown)[2354]: log[main:pptp.c:74]: trying to
> connect to '10.0.0.138'
> Feb3 16:43:11 lucian (unknown)[2356]:
> log[pptp_dispatch_ctrl_packet:pptp_ctrl.c:550]: Client connection
> established.
> Feb3 16:43:12 lucian (unknown)[2356]:
> log[callmgr_main:pptp_callmgr.c:189]: new call!
> Feb3 16:43:12 lucian (unknown)[2356]:
> log[pptp_dispatch_ctrl_packet:pptp_ctrl.c:656]: calling pptp_set_link()
> Feb3 16:43:12 lucian (unknown)[2356]:
> log[pptp_set_link:pptp_ctrl.c:473]: pptp_set_link() packet sending
> succesfull
> Feb3 16:43:12 lucian (unknown)[2356]:
> log[pptp_dispatch_ctrl_packet:pptp_ctrl.c:659]: Outgoing call
> established.
> Feb3 16:43:13 lucian pppd[2358]: pppd 2.3.11 started by root, uid 0
> Feb3 16:43:13 lucian pppd[2358]: ioctl(PPPIOCGFLAGS): Invalid argument
> Feb3 16:43:14 lucian pppd[2358]: tcsetattr: Invalid argument
> Feb3 16:43:14 lucian pppd[2358]: Exit.
> Feb3 16:45:12 lucian (unknown)[2356]:
> log[pptp_conn_close:pptp_ctrl.c:276]: Closing PPTP connection
> ------------------------------
>
> Regards,
> Eran Tromer
>
> =================================================================
> To unsubscribe, send mail to [EMAIL PROTECTED] with
> the word "unsubscribe" in the message body, e.g., run the command
> echo unsubscribe | mail [EMAIL PROTECTED]
>
>
--
mulix
http://www.advogato.com/person/mulix
linux/reboot.h: #define LINUX_REBOOT_MAGIC1 0xfee1dead
=================================================================
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
