I finally configured my TVCard, but I work on resolution 1240x1024, so when
I put the prog on full screen I don't get the image to fill the screen. Does
anyone know how to change the resolution in X on run time (if you can do it
in windows, it has to be available in Linux)? because at 640x480 the image
fills the screen.
Arieh
----- Original Message -----
From: "Ilya Konstantinov" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Cc: "Linux-IL" <[EMAIL PROTECTED]>
Sent: Friday, January 26, 2001 1:34 AM
Subject: Re: AverMedia TVCapture Card
> On Fri, Jan 26, 2001 at 12:56:36AM +0200, [EMAIL PROTECTED] wrote:
> > I have a problem with my FlyVideo TVCard. I had succsesfully configured
it
> > to show good video. But without sound.
> > Which module to install to complete this installation? or (which tuner
type
> > does it have?).
>
> I don't remember which tuner type it was for FlyVideo, but there aren't
> that many to try (1 to 8).
>
> 1. You have the audio connection to your sound card, and Line-In's volume
> in the mixer is high enough, right?
> 2. bttv supports lots of Bt848 TV cards. Apparently, turning the Bt848
> on isn't a big deal - it's the same on all the cards. What differs
> is how they activate the audio chip.
>
> FlyVideo should be bttv card=8 or card=30 (for FlyVideo 98).
> (that's from 2.4's CARDLIST file)
>
> You might also read Documentation/video4linux/bttv/Sound-FAQ
> from the kernel's tree.
>
> --
> Best regards,
> Ilya Konstantinov
>
> =================================================================
> To unsubscribe, send mail to [EMAIL PROTECTED] with
> the word "unsubscribe" in the message body, e.g., run the command
> echo unsubscribe | mail [EMAIL PROTECTED]
>
>
=================================================================
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
