Hi.
I just downloaded the RedHat image 7.0-respin-disc1.iso. I checked the
md5checksum, and it is correct. I burned it using the command:
cdrecord -v speed=8 dev=0,4,0 -data 7.0-respin-disc1.iso
The output of the command looks fine:
Cdrecord 1.8 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,4,0'
scsibus: 0 target: 4 lun: 0
Using libscg version 'schily-0.1'
atapi: 0
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities : SYNC
Vendor_info : 'YAMAHA '
Identifikation : 'CRW8424S '
Revision : '1.0g'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Drive buf size : 3172848 = 3098 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 644 MB
Total size: 740 MB (73:19.44) = 329958 sectors
Lout start: 740 MB (73:21/33) = 329958 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
Disk sub type: 3
ATIP start of lead in: -11079 (97:34/21)
ATIP start of lead out: 336075 (74:43/00)
Disk type: Long strategy type (Cyanine, AZO or similar)
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Blocks total: 336075 Blocks current: 336075 Blocks remaining: 6117
Starting to write CD/DVD at speed 8 in write mode for single session.
Last chance to quit, starting real write in 1 seconds.
Waiting for reader process to fill input buffer ... input buffer ready.
Starting new track at sector: 0
Track 01: 644 of 644 MB written (fifo 100%).
Track 01: Total bytes read/written: 675749888/675749888 (329956 sectors).
Writing time: 559.836s
Fixating...
Fixating time: 36.130s
cdrecord: fifo had 20623 puts and 20623 gets.
cdrecord: fifo was 0 times empty and 17823 times full, min fill was
56%.
I am able to mount the CD with no problem.
I am also able to boot from it and begin the installation.
However, after I choose Local CDROM as my installation media, I get a
screen with the message:
I could not find a Red Hat Linux CDROM in any of your CDROM drives.
On console 3 I see:
* trying to mount device hdc
* loopfd is 6
* failed to mount loop: Invalid argument
* 92 keymaps are available
* loaded 9 keymap tables
* trying to mount device hdc
* got url (null)
* trying to mount device hdc
On console 4 I see:
<4>md.c: sizeof(mdp_super_t)=4096
<4>Partition check:
<4>hda: hda1 hda2
<5>RAMDISK: Compressed image at Block 0
<4>VFS: Mounted root (ext2 filesystem)
<6> ... USB stuff ...
<7> ISO 9660 Extenstions: Microsoft Joliet level 1
<7> ISO 9660 Extenstions: RRIP_1991A
<4> Unable to identify CD-ROM format
<4> VFS: Can't find an ext2 filesystem on dev loop (7,0)
Any ideas ????
Is there anyway to check the CD against the iso image ?
TIA.
--
The day is short, and the work is great, | Aharon Schkolnik
and the laborers are lazy, and the reward | Israel Health Ministry
is great, and the Master of the house is | [EMAIL PROTECTED]
impatient. - Ethics Of The Fathers Ch. 2 | +972 2 670 6954/5
İİİİİİİİİİİİİİİİİİİİİØ unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
