Did you set up routing on the two computers so that the default route (or at least the
route to each other computers network) points to your linux router? If you didn't,
then doing that should fix your problem
I don't remember off hand how to enable root remote login, but it is a considered a
stupid thing to do anyway. What you should do is login with ssh or, if you are too
lazy to set it up you can stll just telnet in as a normal user and then su.
----- Original Message -----
From: zuri zadok
To: [EMAIL PROTECTED]
Sent: Friday, August 18, 2000 4:10 PM
Subject: Fw:
Hi
i started to get inside LINUX networking stuff and i nead help with a strange
situation.
i want to make a linux router station
i have 2 interfaces on that station
1--->192.9.226.254
2--->192.9.230.254
i have 2 station in bote sides (sun solaris statinos)
1--->192.9.226.1
2--->192.9.230.1
i can see the 2 interfaces of the router from bote end station , but i can't get
from one end station to other end station on the other network.
i enabeld the ip routing on the router station from the linuxconf (routed deamon)
i configure the /etc/sysconfig/networks to FORWARD_IPV4="yes"
inside the /proc/sys/net/ipv4/ip_forward there is "1".
what more need to be done that cuse the routing work ??
and 1 more
why i cant telnet to the router with root user?,(i can do it with a new user i
created) i fail when i tried to write the passwd line (i fail on that with an error
:incorrect passwd)
i chenged the /etc/securetty file inside with remarks on all tty's
what more need to be done??
thanks
zz
=================================================================
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
