Hello!
It's a lilo problem, your config wasn't good, I guess.
Cya,
Oren
On Thu, 28 Sep 2000, Shapira Home Mail wrote:
> the prblem was that when i booted linux, i got ascreen full of 00 00 00
> etc...
> i loaded linux using loadlin and did: lilo -u
> that solved the problem....
> now, what do i do??
> hda1 is dos
> hda2 is a v. small partiotion /boot
> hdb1 is dos
> hdc1 is linux
>
> help!!!
>
> MS
>
>
> > guy keren wrote:
> >
> > > the basic idea is to boot your system from a floppy (or a rescue CD -
> for
> > > example, if you have the red-hat 6.2 instal CD, you may boot your PC off
> > > of t, and when it gives you te first prompt, type 'linux recue'). if you
> > > don't posess a rescue disk, you may download one off the network. a good
> > > one is tom's boot-root kit, but there are many others as well - make a
> > > search for 'linux rescue floppy' in some search engine and you'll find
> > > one.
> >
> > Another way to do this is to make a boot floppy and keep it around. Use
> > mkbootdisk to create it. It does not have to be the latest, but the
> > kernel has to support the root disk device and file system. e.g. ide and
> > ext2.
> >
> > You then boot the floopy and at the lilo prompt type:
> >
> > linux root=/dev/hda1 r/o
> > ^^^^
> >
> > Replace hda1 with the appropriate partition.
> >
> > When the system boots, log in as root and run lilo.
> >
> > Geoff.
> > --
> > Geoffrey S. Mendelson
> > Tel: (03) 6944-211 Fax: (03) 6944-225 Email: [EMAIL PROTECTED]
> >
>
>
> =================================================================
> To unsubscribe, send mail to [EMAIL PROTECTED] with
> the word "unsubscribe" in the message body, e.g., run the command
> echo unsubscribe | mail [EMAIL PROTECTED]
>
=================================================================
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
