Try a different type of network card. My experience with some of the
cheaper Realteks is that they don't work or work but accumulate errors
after 10 hours or so. At least get another card on loan to test with.
Regards,
- yba
On Tue, 15 Aug 2000, Noam Ben
Haim wrote:
> I just succeeded in installing when choosing DHCP. alas we don't have DHCP
> server, so I need to configure it myself. what's more, I get the following
> warnings in boot time:
>
> WARNING: the PCI BIOS assigned this PCI NE2k card to IRQ 0, which is
> unlikely to work!
> You should use the PCI BIOS setup to assign a valid IRQ line.
> ne2k-pci.c: PCI NE2000 clone 'RealTek RTL-8029' at I/O 0xe000, IRQ 0
> eth0: RealTek RTL-8029 found at I/O 0xe000 IRQ 0
>
> what should I do next?
> plz help
>
> N
> -----Original Message-----
> From: Isaac Aaron [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, 15 August, 2000 9:05 AM
> To: Noam Ben Haim
> Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED]
> Subject: Re: installation problems RH6.2
>
>
>
> How about removing the NIC, reinstalling and placing it back again?
>
> Isaac Aaron
>
>
>
>
> "Noam Ben
> Haim" <noambh To: <[EMAIL PROTECTED]>
> @ cc:
> onsetinc.com> Subject: installation problems
> RH6.2
> Sent by:
> linux-il-boun
> ce@
> cs.huji.ac.il
>
>
> 15/08/00
> 10:16
>
>
>
>
>
> HI all
>
> I added a PCI Network card, and since then I can't reinstall RH6.2. the
> installation process is stuck at the point of doing the post installation
> configuration. and I have to reboot the computer, ruining the
> installation...
> plz help
> N
>
> Noam Ben Haim
> [EMAIL PROTECTED]
> Tel: +972-9-9561615 ext 122
> Fax: +972-9-9561610
>
>
>
>
> =================================================================
> To unsubscribe, send mail to [EMAIL PROTECTED] with
> the word "unsubscribe" in the message body, e.g., run the command
> echo unsubscribe | mail [EMAIL PROTECTED]
>
>
>
>
>
> =================================================================
> To unsubscribe, send mail to [EMAIL PROTECTED] with
> the word "unsubscribe" in the message body, e.g., run the command
> echo unsubscribe | mail [EMAIL PROTECTED]
>
>
--
EE 77 7F 30 4A 64 2E C5 83 5F E7 49 A6 82 29 BA ~. .~ TclTek Ltd.
=}-------------------------------------------------ooO--U--Ooo-----------{=
- [EMAIL PROTECTED] - tel: +972.52.670.353, http://www.tcltek.co.il -
=================================================================
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
