Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

I sent this message a day ago, but somehow it never got to the list,
here it goes again:

> Hello!
> I have this problem:
> I own a Suse 6.3 system (kernel 2.2.13), with a Xfree 3.3.5
> Recently I was trying to install a TTF server. After lot of time spent
> on solving problems during the
> installation of the xfstt (like suse didn't come with chkconfig) I
> found that the problem is residing in the
> line i add to "/etc/XF86Config":
> FontPath     "inet/localhost:7101"
> I tried some kinds of alternates for this like instead "localhost" i
> put "127.0.0.1" or putting "unix/:7101"
> instead of all the fontpath, nothing worked, the X always crashed on
> the same spot
> I attached to this message a file which is the output of the X on the
> console - the error message
>
> --
>
>
>
>    ----------------------------------------------------------------
>
>
> XFree86 Version 3.3.5 / X Window System
> (protocol Version 11, revision 0, vendor release 6300)
> Release Date: August 23 1999
>         If the server is older than 6-12 months, or if your card is
> newer
>         than the above date, look for a newer version before reporting
>         problems.  (see http://www.XFree86.Org/FAQ)
> Operating System: Linux 2.2.13-SMP i686 [ELF] SuSE
> Configured drivers:
>   SVGA: server for SVGA graphics adaptors (Patchlevel 0):
>       NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2,
>       RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, ET4000,
> ET4000W32,
>       ET4000W32i, ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p,
>       ET4000W32p_rev_a, ET4000W32p_rev_b, ET4000W32p_rev_c,
>       ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1, wd90c00,
> wd90c10,
>       wd90c30, wd90c24, wd90c31, wd90c33, gvga, ati, sis86c201,
> sis86c202,
>       sis86c205, sis86c215, sis86c225, sis5597, sis5598, sis6326,
> sis530,
>       sis620, sis300, sis630, sis540, tvga8200lx, tvga8800cs,
> tvga8900b,
>       tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i,
> tvga9100b,
>       tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi, tgui9430dgi,
>       tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682, tgui9685,
>       cyber9382, cyber9385, cyber9388, cyber9397, cyber9520,
> cyber9525,
>       3dimage975, 3dimage985, cyber9397dvd, blade3d, cyberblade,
> clgd5420,
>       clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430,
> clgd5434,
>       clgd5436, clgd5446, clgd5480, clgd5462, clgd5464, clgd5465,
> clgd6205,
>       clgd6215, clgd6225, clgd6235, clgd7541, clgd7542, clgd7543,
> clgd7548,
>       clgd7555, clgd7556, ncr77c22, ncr77c22e, cpq_avga, mga2064w,
>       mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100, mgag400,
> oti067,
>       oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302,
> ali2308,
>       ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl,
> ark1000pv,
>       ark2000pv, ark2000mt, mx, realtek, s3_savage, s3_virge, AP6422,
> AT24,
>       AT3D, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160, NM2200,
>       ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546,
>       ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct64200,
>       ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110, i740,
> i740_pci,
>       Voodoo Banshee, Voodoo3, r128, generic
> (using VT number 7)
>
> XF86Config: /etc/XF86Config
> (**) stands for supplied, (--) stands for probed/default values
> (--) no ModulePath specified using default: /usr/X11R6/lib/modules
> glx.so: Unknown error loading module
> (**) XKB: rules: "xfree86"
> (**) XKB: model: "pc104"
> (**) XKB: layout: "us"
> (**) Mouse: type: PS/2, device: /dev/psaux, samplerate: 60
> (**) Mouse: buttons: 3, 3 button emulation (timeout: 200ms)
> (**) SVGA: Graphics device ID: "Primary-Card"
> (**) SVGA: Monitor ID: "Primary-Monitor"
> Warning: 'fonts.dir' not found (or not valid) in
> "/usr/X11R6/lib/modules".
>           Entry deleted from font path.
>           (Run 'mkfontdir' on "/usr/X11R6/lib/modules").
> (**) FontPath set to
> 
>"/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/URW,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi,inet/localhost:7101"
> (--) SVGA: PCI: ATI Mach64 GT-B rev 154, Memory @ 0xe0000000,
> 0xe2000000, I/O @ 0x6800
> Using XFree86 ATI driver version 4.6.
> ATI 3D Rage II+DVD graphics controller detected.
> Chip type 4755 "GU", version 2, foundry UMC, class 0, revision 0x02.
> PCI interface detected;  Block I/O base is 0x6800.
> ATI Mach64 video adapter detected.
> Internal RAMDAC (subtype 1) detected.
> Using 8MB linear aperture at 0xE0000000.
> 4096 kB of SGRAM (1:1) detected.
> Internal programmable clock generator detected.
> Reference clock 29.500 MHz.
> (--) SVGA: chipset:  ati
> (--) SVGA: videoram: 4096k
> (**) SVGA: Using 32 bpp, Depth 24, Color weight: 888
> (--) SVGA: Maximum allowed dot-clock: 200.000 MHz
> (**) SVGA: Mode "1024x768": mode clock =  84.990
> (**) SVGA: Mode "832x624": mode clock =  69.120
> (**) SVGA: Mode "800x600": mode clock =  66.560
> (**) SVGA: Mode "640x480": mode clock =  50.000
> (**) SVGA: Virtual resolution set to 1024x768
> _FontTransSocketINETConnect: Can't connect: errno = 111
> failed to set default font path
> 
>'/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/URW,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi,inet/localhost:7101'
> Fatal server error:
> could not open default font 'fixed'
>
> When reporting a problem related to a server crash, please send
> the full server output, not just the last messages
>
> X connection to :0.0 broken (explicit kill or server shutdown).
>
--
Noam Meltzer
[EMAIL PROTECTED]
ICQ: 4853872





-- Binary/unsupported file stripped by Listar --
-- Type: application/x-pkcs7-signature
-- File: smime.p7s
-- Desc: S/MIME Cryptographic Signature


=================================================================
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]

Reply via email to