Ben-Nes Michael wrote: > Lilo is not working with scsi :-( > what should i do/read to solve this proble ? > > fdisk /dev/sda > > The number of cylinders for this disk is set to 1115. > There is nothing wrong with that, but this is larger than 1024, > and could in certain setups cause problems with: > 1) software that runs at boot time (e.g., LILO) > 2) booting and partitioning software from other OSs > (e.g., DOS FDISK, OS/2 FDISK) Make sure your first partition and boot partition (if not the first), fit in the first 1024 "cylinders" (e.g. less than 8192 meg). Geoff. -- Geoffrey S. Mendelson Tel: (03) 6944-211 Fax: (03) 6944-225 Email: [EMAIL PROTECTED] ================================================================= To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
