On 5/21/2025 2:32 AM, Naman Jain wrote:
>
>
> On 5/21/2025 11:33 AM, Naman Jain wrote:
>>
>>
>> On 5/21/2025 12:25 AM, Stanislav Kinsburskii wrote:
>>> On Mon, May 19, 2025 at 10:26:42AM +0530, Naman Jain wrote:
>>>> Provide an interface for Virtual Machine Monitor like OpenVMM and its
>>>> use as OpenHCL paravisor to control VTL0 (Virtual trust Level).
>>>> Expose devices and support IOCTLs for features like VTL creation,
>>>> VTL0 memory management, context switch, making hypercalls,
>>>> mapping VTL0 address space to VTL2 userspace, getting new VMBus
>>>> messages and channel events in VTL2 etc.
>>>>
>>>> Co-developed-by: Roman Kisel <rom...@linux.microsoft.com>
>>>> Signed-off-by: Roman Kisel <rom...@linux.microsoft.com>
>>>> Co-developed-by: Saurabh Sengar <ssen...@linux.microsoft.com>
>>>> Signed-off-by: Saurabh Sengar <ssen...@linux.microsoft.com>
>>>> Reviewed-by: Roman Kisel <rom...@linux.microsoft.com>
>>>> Reviewed-by: Alok Tiwari <alok.a.tiw...@oracle.com>
>>>> Message-ID: <20250512140432.2387503-3-namj...@linux.microsoft.com>
>>>> Signed-off-by: Naman Jain <namj...@linux.microsoft.com>
>>>> ---
>>>> drivers/hv/Kconfig | 20 +
>>>> drivers/hv/Makefile | 7 +-
>>>> drivers/hv/mshv_vtl.h | 52 +
>>>> drivers/hv/mshv_vtl_main.c | 1783 +++++++++++++++++++++++++++++++++++
>>>> include/hyperv/hvgdk_mini.h | 81 ++
>>>> include/hyperv/hvhdk.h | 1 +
>>>> include/uapi/linux/mshv.h | 82 ++
>>>> 7 files changed, 2025 insertions(+), 1 deletion(-)
>>>> create mode 100644 drivers/hv/mshv_vtl.h
>>>> create mode 100644 drivers/hv/mshv_vtl_main.c
>>>>
>>>> diff --git a/drivers/hv/Kconfig b/drivers/hv/Kconfig
>>>> index eefa0b559b73..21cee5564d70 100644
>>>> --- a/drivers/hv/Kconfig
>>>> +++ b/drivers/hv/Kconfig
>>>> @@ -72,4 +72,24 @@ config MSHV_ROOT
>>>> If unsure, say N.
>>>> +config MSHV_VTL
>>>> + tristate "Microsoft Hyper-V VTL driver"
>>>> + depends on HYPERV && X86_64
>>>> + depends on TRANSPARENT_HUGEPAGE
>>>
>>> Why does it depend on TRANSPARENT_HUGEPAGE?
>>>
>>
>> Thanks for reviewing. This config is required for below functions which
>> are used for mshv_vtl_low device.
>>
>> vm_fault_t mshv_vtl_low_huge_fault ->
>> * vmf_insert_pfn_pmd
>> * vmf_insert_pfn_pud
>>
>>
>>> <snip>
>>>
>>>> diff --git a/include/hyperv/hvgdk_mini.h b/include/hyperv/hvgdk_mini.h
>>>> index 1be7f6a02304..cc11000e39f4 100644
>>>> --- a/include/hyperv/hvgdk_mini.h
>>>> +++ b/include/hyperv/hvgdk_mini.h
>>>> @@ -882,6 +882,23 @@ struct hv_get_vp_from_apic_id_in {
>>>> u32 apic_ids[];
>>>> } __packed;
>>>> +union hv_register_vsm_partition_config {
>>>> + __u64 as_u64;
>>>
>>> Please, follow the file pattern: as_u64 -> as_uint64
>>>
>>>> + struct {
>>>> + __u64 enable_vtl_protection : 1;
>>>
>>> Ditto: __u64 -> u64
>>>
>>>> + __u64 default_vtl_protection_mask : 4;
>>>> + __u64 zero_memory_on_reset : 1;
>>>> + __u64 deny_lower_vtl_startup : 1;
>>>> + __u64 intercept_acceptance : 1;
>>>> + __u64 intercept_enable_vtl_protection : 1;
>>>> + __u64 intercept_vp_startup : 1;
>>>> + __u64 intercept_cpuid_unimplemented : 1;
>>>> + __u64 intercept_unrecoverable_exception : 1;
>>>> + __u64 intercept_page : 1;
>>>> + __u64 mbz : 51;
>>>> + };
>>>> +};
>>>> +
>>>> /*
>>>> diff --git a/include/hyperv/hvhdk.h b/include/hyperv/hvhdk.h
>>>> index b4067ada02cf..9b890126e8e8 100644
>>>> --- a/include/hyperv/hvhdk.h
>>>> +++ b/include/hyperv/hvhdk.h
>>>> @@ -479,6 +479,7 @@ struct hv_connection_info {
>>>> #define HV_EVENT_FLAGS_COUNT (256 * 8)
>>>> #define HV_EVENT_FLAGS_BYTE_COUNT (256)
>>>> #define HV_EVENT_FLAGS32_COUNT (256 / sizeof(u32))
>>>> +#define HV_EVENT_FLAGS_LONG_COUNT (HV_EVENT_FLAGS_BYTE_COUNT /
>>>> sizeof(__u64))
>>>
>>> Ditto
>>>
>>>> /* linux side we create long version of flags to use long bit ops on
>>>> flags */
>>>> #define HV_EVENT_FLAGS_UL_COUNT (256 / sizeof(ulong))
>>>> diff --git a/include/uapi/linux/mshv.h b/include/uapi/linux/mshv.h
>>>> index 876bfe4e4227..a8c39b08b39a 100644
>>>> --- a/include/uapi/linux/mshv.h
>>>> +++ b/include/uapi/linux/mshv.h
>>>> @@ -288,4 +288,86 @@ struct mshv_get_set_vp_state {
>>>> * #define MSHV_ROOT_HVCALL _IOWR(MSHV_IOCTL, 0x07, struct
>>>> mshv_root_hvcall)
>>>> */
>>>> +/* Structure definitions, macros and IOCTLs for mshv_vtl */
>>>> +
>>>> +#define MSHV_CAP_CORE_API_STABLE 0x0
>>>> +#define MSHV_CAP_REGISTER_PAGE 0x1
>>>> +#define MSHV_CAP_VTL_RETURN_ACTION 0x2
>>>> +#define MSHV_CAP_DR6_SHARED 0x3
>>>> +#define MSHV_MAX_RUN_MSG_SIZE 256
>>>> +
>>>> +#define MSHV_VP_MAX_REGISTERS 128
>>>> +
>>>> +struct mshv_vp_registers {
>>>> + __u32 count; /* at most MSHV_VP_MAX_REGISTERS */
>>>
>>> Same here: __u{32,64} -> u{32,64}.
>>>
>>> Please, address everywhere.
>>>
>>
>> I'll take care of all of these in my next patch.
>>
>
>
> One concern about this change in include/uapi/linux/mshv.h.
> I see the convention of using '__' family of data types in this file.
> Whatever we do here, will be applicable to existing code as well.
> Do you suggest we should change it to u{32,64} variants or keep
> it in current form?
>
uapi code uses the '__' versions of these types, so they should stay
as they are.
Thanks
Nuno
> Regards,
> Naman
>
>>> <snip>
>>>
>>>> +
>>>> +/* vtl device */
>>>> +#define MSHV_CREATE_VTL _IOR(MSHV_IOCTL, 0x1D, char)
>>>> +#define MSHV_VTL_ADD_VTL0_MEMORY _IOW(MSHV_IOCTL, 0x21, struct
>>>> mshv_vtl_ram_disposition)
>>>> +#define MSHV_VTL_SET_POLL_FILE _IOW(MSHV_IOCTL, 0x25, struct
>>>> mshv_vtl_set_poll_file)
>>>> +#define MSHV_VTL_RETURN_TO_LOWER_VTL _IO(MSHV_IOCTL, 0x27)
>>>> +#define MSHV_GET_VP_REGISTERS _IOWR(MSHV_IOCTL, 0x05, struct
>>>> mshv_vp_registers)
>>>> +#define MSHV_SET_VP_REGISTERS _IOW(MSHV_IOCTL, 0x06, struct
>>>> mshv_vp_registers)
>>>> +
>>>> +/* VMBus device IOCTLs */
>>>> +#define MSHV_SINT_SIGNAL_EVENT _IOW(MSHV_IOCTL, 0x22, struct
>>>> mshv_vtl_signal_event)
>>>> +#define MSHV_SINT_POST_MESSAGE _IOW(MSHV_IOCTL, 0x23, struct
>>>> mshv_vtl_sint_post_msg)
>>>> +#define MSHV_SINT_SET_EVENTFD _IOW(MSHV_IOCTL, 0x24, struct
>>>> mshv_vtl_set_eventfd)
>>>> +#define MSHV_SINT_PAUSE_MESSAGE_STREAM _IOW(MSHV_IOCTL, 0x25, struct
>>>> mshv_sint_mask)
>>>> +
>>>> +/* hv_hvcall device */
>>>> +#define MSHV_HVCALL_SETUP _IOW(MSHV_IOCTL, 0x1E, struct
>>>> mshv_vtl_hvcall_setup)
>>>> +#define MSHV_HVCALL _IOWR(MSHV_IOCTL, 0x1F, struct
>>>> mshv_vtl_hvcall)
>>>
>>> How many of these ioctls are actually used by the mshv root driver?
>>> Should those which are VTl-specific be named as such (like
>>> MSHV_VTL_SET_POLL_FILE)?
>>> Another option would be to keep all the names generic.
>>>
>>> Thanks,
>>> Stanislav
>>
>> None of the IOCTLs in mshv_vtl section, introduced in this patch is used
>> by mshv_root driver. Since IOCTLs of mshv_root does not have MSHV_ROOT
>> prefix, I am OK with removing MSHV_VTL_* prefix from these IOCTL names.
>> You can let me know if you want me to prefix them with MSHV_VTL.
>>
>> Thanks again for reviewing.
>>
>> Regards,
>> Naman
>>
>>>
>>>> #endif
>>>> --
>>>> 2.34.1
>>>>
>>
