Dear Paul, Sorry I respond to your feedback late.
> Dear Willie, > > > Thank you for the patch. > > Am 24.01.25 um 06:18 schrieb Willie Thai: >> From: wthai <wt...@willie-obmc-builder.nvidia.com> > > Please use your full name. > > $ git config --global user.name "Willie Thai" > $ git commit --amend --author="Willie Thai <wt...@nvidia.com>" > > Also is this the wanted email address? > >> The GB200NVL BMC is an Aspeed Ast2600 based BMC > > AST [1] > > [1]: https://www.aspeedtech.com/server_ast2600/ > >> for Nvidia Blackwell GB200NVL platform. > > If possible, please add reference to datasheets. > >> Signed-off-by: wthai <wt...@nvidia.com> > > Ditto, regarding the name. > >> --- >> .../bindings/arm/aspeed/aspeed.yaml | 1 + >> arch/arm/boot/dts/aspeed/Makefile | 1 + >> .../aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts | 1352 +++++++++++++++++ >> 3 files changed, 1354 insertions(+) >> create mode 100644 >> arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts >> >> diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml >> b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml >> index 2f92b8ab08fa..0a6f3654dcb5 100644 >> --- a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml >> +++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml >> @@ -96,6 +96,7 @@ properties: >> - inventec,starscream-bmc >> - inventec,transformer-bmc >> - jabil,rbp-bmc >> + - nvidia,gb200nvl-bmc >> - qcom,dc-scm-v1-bmc >> - quanta,s6q-bmc >> - ufispace,ncplite-bmc >> diff --git a/arch/arm/boot/dts/aspeed/Makefile >> b/arch/arm/boot/dts/aspeed/Makefile >> index c4f064e4b073..0dc5240866f3 100644 >> --- a/arch/arm/boot/dts/aspeed/Makefile >> +++ b/arch/arm/boot/dts/aspeed/Makefile >> @@ -48,6 +48,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ >> aspeed-bmc-lenovo-hr630.dtb \ >> aspeed-bmc-lenovo-hr855xg2.dtb \ >> aspeed-bmc-microsoft-olympus.dtb \ >> + aspeed-bmc-nvidia-gb200nvl-bmc.dtb \ >> aspeed-bmc-opp-lanyang.dtb \ >> aspeed-bmc-opp-mowgli.dtb \ >> aspeed-bmc-opp-nicole.dtb \ >> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts >> b/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts >> new file mode 100644 >> index 000000000000..91d025229aba >> --- /dev/null >> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts >> @@ -0,0 +1,1352 @@ >> +// SPDX-License-Identifier: GPL-2.0+ >> +/dts-v1/; >> + >> +#include "aspeed-g6.dtsi" >> +#include <dt-bindings/gpio/aspeed-gpio.h> >> +#include <dt-bindings/leds/common.h> >> + >> +&gpio0 { >> + gpio-line-names = >> + >> + /* gpio-line-names are the combination of <signal>-<I/O> , "" is the >> placeholder for the unused pins >> + */ >> + >> + /* 208 (26*8) 3.3V GPIOs */ >> + >> + /*A0-A7*/ >> + "", "", "", "", "", "", "", "", > > Other files seem to put it in one line. Mostly, we can put all the definitions in one line, but some will exceed the line length limit. That will create a warning in checkpatch.pl, I will try to put them in one line except those exceed the length limit. > >> + >> + /*B0-B7*/ >> + "", "", "", "", "", "", "", "", >> + >> + /*C0-C7*/ >> + "SGPIO_I2C_MUX_SEL-O", >> + "", "", "", "", "", "", "", >> + >> + /*D0-D7*/ >> + "", "", "", >> + "UART1_MUX_SEL-O", >> + "", >> + "FPGA_PEX_RST_L-O", >> + "", "", >> + >> + /*E0-E7*/ >> + "RTL8221_PHY_RST_L-O", >> + "RTL8211_PHY_INT_L-I", >> + "", >> + "UART3_MUX_SEL-O", >> + "", "", "", >> + "SGPIO_BMC_EN-O", >> + >> + /*F0-F7*/ >> + "", "", "", "", "", "", "", "", >> + >> + /*G0-G7*/ >> + "", "", "", "", "", "", "", "", >> + >> + /*H0-H7*/ >> + "", "", "", "", "", "", "", "", >> + >> + /*I0-I7*/ >> + "", "", "", "", "", >> + "QSPI2_RST_L-O", >> + "GLOBAL_WP_BMC-O", >> + "BMC_DDR4_TEN-O", >> + >> + /*J0-J7*/ >> + "", "", "", "", "", "", "", "", >> + >> + /*K0-K7*/ >> + "", "", "", "", "", "", "", "", >> + >> + /*L0-L7*/ >> + "", "", "", "", "", "", "", "", >> + >> + /*M0-M7*/ >> + "PCIE_EP_RST_EN-O", >> + "BMC_FRU_WP-O", >> + "HMC_RESET_L-O", >> + "STBY_POWER_EN-O", >> + "STBY_POWER_PG-I", >> + "PCIE_EP_RST_L-O", >> + "", "", >> + >> + /*N0-N7*/ >> + "", "", "", "", "", "", "", "", >> + >> + /*O0-O7*/ >> + "", "", "", "", "", "", "", "", >> + >> + /*P0-P7*/ >> + "", "", "", "", "", "", "", "", >> + >> + /*Q0-Q7*/ >> + "", "", "", "", "", "", "", "", >> + >> + /*R0-R7*/ >> + "", "", "", "", "", "", "", "", >> + >> + /*S0-S7*/ >> + "", "", "", "", "", "", "", "", >> + >> + /*T0-T7*/ >> + "", "", "", "", "", "", "", "", >> + >> + /*U0-U7*/ >> + "", "", "", "", "", "", "", "", >> + >> + /*V0-V7*/ >> + "AP_EROT_REQ-O", >> + "EROT_AP_GNT-I", >> + "", >> + "", >> + "PCB_TEMP_ALERT-I", >> + "", "", "", >> + >> + /*W0-W7*/ >> + "", "", "", "", "", "", "", "", >> + >> + /*X0-X7*/ >> + "", "", >> + "TPM_MUX_SEL-O", >> + "", "", "", "", "", >> + >> + /*Y0-Y7*/ >> + "", "", "", >> + "EMMC_RST-O", >> + "","", "", "", >> + >> + /*Z0-Z7*/ >> + "BMC_READY-O", >> + "", "", "", "", "", "", ""; >> +}; >> + >> +&sgpiom0 { >> + status="okay"; >> + ngpios = <128>; >> + >> + gpio-line-names = >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "RUN_POWER_FAULT_L-I", >> + "SYS_RST_IN_L-O", >> + "RUN_POWER_PG-I", >> + "PWR_BRAKE_L-O", >> + "SYS_RST_OUT_L-I", >> + "RUN_POWER_EN-O", >> + "L0L1_RST_REQ_OUT_L-I", >> + "SHDN_FORCE_L-O", >> + "L2_RST_REQ_OUT_L-I", >> + "SHDN_REQ_L-O", >> + "SHDN_OK_L-I", >> + "UID_LED_N-O", >> + "BMC_I2C1_FPGA_ALERT_L-I", >> + "SYS_FAULT_LED_N-O", >> + "BMC_I2C0_FPGA_ALERT_L-I", >> + "PWR_LED_N-O", >> + "FPGA_RSVD_FFU3-I", >> + "", >> + "FPGA_RSVD_FFU2-I", >> + "", >> + "FPGA_RSVD_FFU1-I", >> + "", >> + "FPGA_RSVD_FFU0-I", >> + "BMC_I2C_SSIF_ALERT_L-O", >> + "CPU_BOOT_DONE-I", >> + "JTAG_MUX_SELECT-O", >> + "SPI_BMC_FPGA_INT_L-I", >> + "RTC_CLR_L-O", >> + "THERM_BB_WARN_L-I", >> + "UART_MUX_SEL-O", >> + "THERM_BB_OVERT_L-I", >> + "", >> + "CPU0_UPHY3_PRSNT1_L-I", >> + "IOBRD0_RUN_POWER_EN-O", >> + "CPU0_UPHY3_PRSNT0_L-I", >> + "IOBRD1_RUN_POWER_EN-O", >> + "CPU0_UPHY2_PRSNT1_L-I", >> + "FPGA_RSVD_FFU4-O", >> + "CPU0_UPHY2_PRSNT0_L-I", >> + "FPGA_RSVD_FFU5-O", >> + "CPU0_UPHY1_PRSNT1_L-I", >> + "FPGA_RSVD_FFU6-O", >> + "CPU0_UPHY1_PRSNT0_L-I", >> + "FPGA_RSVD_FFU7-O", >> + "CPU0_UPHY0_PRSNT1_L-I", >> + "RSVD_NV_PLT_DETECT-O", >> + "CPU0_UPHY0_PRSNT0_L-I", >> + "SPI1_INT_L-O", >> + "CPU1_UPHY3_PRSNT1_L-I", >> + "", >> + "CPU1_UPHY3_PRSNT0_L-I", >> + "HMC_EROT_MUX_STATUS", >> + "CPU1_UPHY2_PRSNT1_L-I", >> + "", >> + "CPU1_UPHY2_PRSNT0_L-I", >> + "", >> + "CPU1_UPHY1_PRSNT1_L-I", >> + "", >> + "CPU1_UPHY1_PRSNT0_L-I", >> + "", >> + "CPU1_UPHY0_PRSNT1_L-I", >> + "", >> + "CPU1_UPHY0_PRSNT0_L-I", >> + "", >> + "FAN1_PRESENT_L-I", >> + "", >> + "FAN0_PRESENT_L-I", >> + "", >> + "", >> + "", >> + "IPEX_CABLE_PRSNT_L-I", >> + "", >> + "M2_1_PRSNT_L-I", >> + "", >> + "M2_0_PRSNT_L-I", >> + "", >> + "CPU1_UPHY4_PRSNT1_L-I", >> + "", >> + "CPU0_UPHY4_PRSNT0_L-I", >> + "", >> + "", >> + "", >> + "I2C_RTC_ALERT_L-I", >> + "", >> + "FAN7_PRESENT_L-I", >> + "", >> + "FAN6_PRESENT_L-I", >> + "", >> + "FAN5_PRESENT_L-I", >> + "", >> + "FAN4_PRESENT_L-I", >> + "", >> + "FAN3_PRESENT_L-I", >> + "", >> + "FAN2_PRESENT_L-I", >> + "", >> + "IOBRD0_IOX_INT_L-I", >> + "", >> + "IOBRD1_PRSNT_L-I", >> + "", >> + "IOBRD0_PRSNT_L-I", >> + "", >> + "IOBRD1_PWR_GOOD-I", >> + "", >> + "IOBRD0_PWR_GOOD-I", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "FAN_FAIL_IN_L-I", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "PDB_CABLE_PRESENT_L-I", >> + "", >> + "", >> + "", >> + "CHASSIS_PWR_BRK_L-I", >> + "", >> + "", >> + "", >> + "IOBRD1_IOX_INT_L-I", >> + "", >> + "10GBE_SMBALRT_L-I", >> + "", >> + "PCIE_WAKE_L-I", >> + "", >> + "I2C_M21_ALERT_L-I", >> + "", >> + "I2C_M20_ALERT_L-I", >> + "", >> + "TRAY_FAST_SHDN_L-I", >> + "", >> + "UID_BTN_N-I", >> + "", >> + "PWR_BTN_L-I", >> + "", >> + "PSU_SMB_ALERT_L-I", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "NODE_LOC_ID[0]-I", >> + "", >> + "NODE_LOC_ID[1]-I", >> + "", >> + "NODE_LOC_ID[2]-I", >> + "", >> + "NODE_LOC_ID[3]-I", >> + "", >> + "NODE_LOC_ID[4]-I", >> + "", >> + "NODE_LOC_ID[5]-I", >> + "", >> + "FAN10_PRESENT_L-I", >> + "", >> + "FAN9_PRESENT_L-I", >> + "", >> + "FAN8_PRESENT_L-I", >> + "", >> + "FPGA1_READY_HMC-I", >> + "", >> + "DP_HPD-I", >> + "", >> + "HMC_I2C3_FPGA_ALERT_L-I", >> + "", >> + "HMC_I2C2_FPGA_ALERT_L-I", >> + "", >> + "FPGA0_READY_HMC-I", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "LEAK_DETECT_ALERT_L-I", >> + "", >> + "MOD1_B2B_CABLE_PRESENT_L-I", >> + "", >> + "MOD1_CLINK_CABLE_PRESENT_L-I", >> + "", >> + "FAN11_PRESENT_L-I", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "", >> + "RSVD_SGPIO_IN_CRC[0]", >> + "RSVD_SGPIO_O_CRC[7]", >> + "RSVD_SGPIO_IN_CRC[1]", >> + "RSVD_SGPIO_O_CRC[6]", >> + "RSVD_SGPIO_IN_CRC[2]", >> + "RSVD_SGPIO_O_CRC[5]", >> + "RSVD_SGPIO_IN_CRC[3]", >> + "RSVD_SGPIO_O_CRC[4]", >> + "RSVD_SGPIO_IN_CRC[4]", >> + "RSVD_SGPIO_O_CRC[3]", >> + "RSVD_SGPIO_IN_CRC[5]", >> + "RSVD_SGPIO_O_CRC[2]", >> + "RSVD_SGPIO_IN_CRC[6]", >> + "RSVD_SGPIO_O_CRC[1]", >> + "RSVD_SGPIO_IN_CRC[7]", >> + "RSVD_SGPIO_O_CRC[0]"; >> +}; >> + >> +// EMMC group that excludes WP pin >> +&pinctrl { >> + pinctrl_emmcg5_default: emmcg5_default { >> + function = "EMMC"; >> + groups = "EMMCG5"; >> + }; >> +}; >> + >> +/ { >> + model = "AST2600 GB200NVL BMC"; >> + compatible = "nvidia,gb200nvl-bmc", "aspeed,ast2600"; >> + >> + aliases { >> + serial2 = &uart3; >> + serial4 = &uart5; >> + i2c16 = &imux16; >> + i2c17 = &imux17; >> + i2c18 = &imux18; >> + i2c19 = &imux19; >> + i2c20 = &imux20; >> + i2c21 = &imux21; >> + i2c22 = &imux22; >> + i2c23 = &imux23; >> + i2c24 = &imux24; >> + i2c25 = &imux25; >> + i2c26 = &imux26; >> + i2c27 = &imux27; >> + i2c28 = &imux28; >> + i2c29 = &imux29; >> + i2c30 = &imux30; >> + i2c31 = &imux31; >> + i2c32 = &imux32; >> + i2c33 = &imux33; >> + i2c34 = &imux34; >> + i2c35 = &imux35; >> + i2c36 = &imux36; >> + i2c37 = &imux37; >> + i2c38 = &imux38; >> + i2c39 = &imux39; >> + i2c40 = &e1si2c0; >> + i2c41 = &e1si2c1; >> + i2c42 = &e1si2c2; >> + i2c43 = &e1si2c3; >> + i2c44 = &e1si2c4; >> + i2c45 = &e1si2c5; >> + i2c46 = &e1si2c6; >> + i2c47 = &e1si2c7; >> + i2c48 = &i2c5mux0; >> + i2c49 = &m2riser; >> + i2c50 = &i2c5mux2; >> + i2c51 = &i2c5mux3; >> + }; >> + >> + chosen { >> + stdout-path = &uart5; >> + bootargs = "console=tty0 console=ttyS4,115200n8 earlyprintk"; >> + }; >> + >> + memory@80000000 { >> + device_type = "memory"; >> + reg = <0x80000000 0x80000000>; >> + }; >> + >> + reserved-memory { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + ranges; >> + >> + vga_memory: framebuffer@9f000000 { >> + no-map; >> + reg = <0x9f000000 0x01000000>; /* 16M */ >> + }; >> + >> + ramoops@a0000000 { >> + compatible = "ramoops"; >> + reg = <0xa0000000 0x100000>; /* 1MB */ >> + record-size = <0x10000>; /* 64KB */ >> + max-reason = <2>; /* KMSG_DUMP_OOPS */ >> + }; >> + >> + gfx_memory: framebuffer { >> + size = <0x01000000>; >> + alignment = <0x01000000>; >> + compatible = "shared-dma-pool"; >> + reusable; >> + }; >> + >> + video_engine_memory: jpegbuffer { >> + size = <0x02000000>; /* 32M */ >> + alignment = <0x01000000>; >> + compatible = "shared-dma-pool"; >> + reusable; >> + }; >> + }; >> + >> + power-gpios{ >> + n2-gpios = <&gpio0 ASPEED_GPIO(N, 2) >> (GPIO_ACTIVE_HIGH|GPIO_PULL_UP)>; >> + n3-gpios = <&gpio0 ASPEED_GPIO(N, 3) >> (GPIO_ACTIVE_HIGH|GPIO_PULL_UP)>; >> + }; >> + >> + leds { >> + compatible = "gpio-leds"; >> + uid_led { >> + gpios = <&sgpiom0 27 GPIO_ACTIVE_LOW>; >> + }; >> + fault_led { >> + gpios = <&sgpiom0 29 GPIO_ACTIVE_LOW>; >> + }; >> + power_led { >> + gpios = <&sgpiom0 31 GPIO_ACTIVE_LOW>; >> + }; >> + >> + // Non-LEDs: >> + // BMC_READY-O GPIO pin (not an LED) is being bound to the >> GPIO LED driver. >> + // Notes: >> + // * This is a workaround and leverages the GPIO LED driver to >> enable control of >> + // reset tolerance and still allow the GPIO to be controlled >> from user space. > > Add this also to the commit message? > >> + // * The standard Linux GPIO driver allows control of reset >> tolerance, however >> + // does not expose user space APIs for user space control of >> the GPIO pin. >> + // * GPIO_TRANSITORY = reset tolerance is disabled >> + // * Any non-leds should be added below this line. > > Use C89 style comments? (Though it’s inconsistent and I do not know if > there is a guideline.) Sure, will fix. > >> + bmc_ready_noled { >> + gpios = <&gpio0 ASPEED_GPIO(Z, 0) >> (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>; >> + }; >> + }; >> + >> + buttons { >> + power-btn { >> + gpio = <&sgpiom0 156 GPIO_ACTIVE_LOW>; >> + }; >> + uid-btn { >> + gpio = <&sgpiom0 154 GPIO_ACTIVE_LOW>; >> + }; >> + }; >> +}; >> + >> +// Enabled Primary flash on FMC for bring up activity > > Imperative mood: Enable. Sure, will fix. > >> +&fmc { >> + status = "okay"; >> + flash@0 { >> + status = "okay"; >> + compatible = "jedec,spi-nor"; >> + label = "bmc"; >> + spi-max-frequency = <50000000>; >> + partitions { >> + compatible = "fixed-partitions"; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + >> + u-boot@0 { >> + reg = <0x0 0xe0000>; // 896KB >> + label = "u-boot"; >> + }; >> + >> + kernel@100000 { >> + reg = <0x100000 0x900000>; // 9MB >> + label = "kernel"; >> + }; >> + >> + rofs@a00000 { >> + reg = <0xa00000 0x35FF000>; // 55292KB (extends >> to end of 64MB SPI - 4KB) >> + label = "rofs"; > > Just my ignorance about how the calculations are done, and why some > holes are left. We reserved some space for security feature. > >> + }; >> + }; >> + }; >> +}; >> + >> +&fmcraw { >> + status = "okay"; >> + spidev@0 { >> + compatible = "hgx,glacier"; >> + status = "okay"; >> + }; >> +}; >> + >> +&spi1raw { >> + status = "okay"; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pinctrl_spi1_default>; >> + spidev@0 { >> + spi-max-frequency = <25000000>; >> + compatible = "hgx,glacier"; >> + status = "okay"; >> + }; >> +}; >> + >> +&spi2 { >> + status = "okay"; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pinctrl_spi2_default>; >> + >> + // Data SPI is 64MB in size >> + flash@0 { >> + status = "okay"; >> + label = "config"; >> + spi-max-frequency = <50000000>; >> + partitions { >> + compatible = "fixed-partitions"; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + >> + u-boot-env@0 { >> + reg = <0x0 0x40000>; // 256KB at >> offset 0 >> + label = "u-boot-env"; >> + }; >> + >> + rwfs@40000 { >> + reg = <0x40000 0x1000000>; // 16MB at >> offset 0x40000 >> + label = "rwfs"; >> + }; >> + >> + log@0x1040000 { >> + reg = <0x1040000 0x2800000>; // 40MB at >> offset 0x1040000 >> + label = "log"; // Move log to >> EMMC, make this unused >> + }; >> + }; >> + }; >> +}; >> + >> +&uart1 { >> + status = "okay"; >> +}; >> + >> +&uart3 { >> + //Enabling SOL > > Add space after //. Sure, will fix. > >> + status = "okay"; >> +}; >> + >> +&uart5 { >> + // BMC Debug Console >> + status = "okay"; >> +}; >> + >> +&uart_routing { >> + status = "okay"; >> +}; >> + >> +// MAC1 (per schematics, 1-based MAC1-MAC4) of AST2600 connected to >> external PHY >> +// This is "mac0" in zero-based DTS >> +&mdio0 { >> + status = "okay"; >> + ethphy0: ethernet-phy@0 { >> + compatible = "ethernet-phy-ieee802.3-c22"; >> + reg = <0>; >> + }; >> + >> +}; >> + >> +&mdio3 { >> + status = "okay"; >> + ethphy3: ethernet-phy@2 { >> + compatible = "ethernet-phy-ieee802.3-c22"; >> + reg = <2>; >> + }; >> +}; >> + >> +&mac0 { >> + status = "okay"; >> + pinctrl-names = "default"; >> + phy-mode = "rgmii-rxid"; >> + max-speed = <1000>; >> + phy-handle = <ðphy3>; >> + pinctrl-0 = <&pinctrl_rgmii1_default>; >> +}; >> + >> +&mac2 { >> + status = "okay"; >> + phy-mode = "rmii"; >> + use-ncsi; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pinctrl_rmii3_default>; >> +}; >> + >> +// Enable emmc >> +&emmc_controller { >> + status = "okay"; >> +}; >> + >> +&emmc { >> + non-removable; >> + pinctrl-0 = <&pinctrl_emmcg5_default>; >> + bus-width = <4>; >> + max-frequency = <52000000>; >> + clk-phase-mmc-hs200 = <9>, <225>; >> +}; >> + >> +/* >> +* Enable USB port A as device (via the virtual hub) to host >> +*/ > > Please align. > Sure, will fix. >> +&vhub { >> + status = "okay"; >> + pinctrl-names = "default"; >> + /* >> + Uncomment below line to enable internal EHCI controller >> + Current config uses xHCI Port1 >> + */ > > Use common comment styles? > Sure, will fix. >> + // pinctrl-0 = <&pinctrl_usb2adp_default>; >> +}; >> + >> +&video { >> + status = "okay"; >> + memory-region = <&video_engine_memory>; >> +}; >> + >> +// USB 2.0 to HMC, on USB Port B >> +&ehci1 { >> + status = "okay"; >> +}; >> + >> +// USB 1.0 >> +&uhci { >> + status = "okay"; >> +}; >> + >> +// I2C1, SSIF IPMI interface >> +&i2c0 { >> + status = "okay"; >> + clock-frequency = <400000>; >> + disable-master = <1>; >> + i2c-tck-thddat-config = <0x0099EC00>; >> + ssif-bmc@10 { >> + compatible = "ssif-bmc"; >> + alert-gpio = <&sgpiom0 39 GPIO_ACTIVE_LOW>; >> + pulse_width_us = <5>; >> + timeout_ms = <4995>; >> + reg = <0x10>; >> + }; >> +}; >> + >> +// I2C2 >> +// BMC_I2C1_FPGA - Secondary FPGA >> +// HMC EROT >> +&i2c1 { >> + status = "okay"; >> + clock-frequency = <400000>; >> + multi-master; >> + i2c-scl-clk-low-timeout-us = <32000>; >> + i2c-tck-thddat-config = <0x0099EC00>; >> +}; >> + >> +// I2C4 >> +&i2c3 { >> + status = "disabled"; >> +}; >> + >> +// I2C5 >> +// RTC Driver >> +// IO Expander >> +&i2c4 { >> + status = "okay"; >> + clock-frequency = <400000>; >> + i2c-tck-thddat-config = <0x0099EC00>; >> + // Module 0, Expander @0x21 >> + exp4: pca9555@21 { >> + compatible = "nxp,pca9555"; >> + reg = <0x21>; >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + #address-cells = <1>; >> + #size-cells = <0>; >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + interrupt-parent = <&gpio1>; >> + interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>; >> + >> + gpio-line-names = >> + "RTC_MUX_SEL-O", >> + "PCI_MUX_SEL-O", >> + "TPM_MUX_SEL-O", >> + "FAN_MUX-SEL-O", >> + "SGMII_MUX_SEL-O", >> + "DP_MUX_SEL-O", >> + "UPHY3_USB_SEL-O", >> + "NCSI_MUX_SEL-O", >> + "BMC_PHY_RST-O", >> + "RTC_CLR_L-O", >> + "BMC_12V_CTRL-O", >> + "PS_RUN_IO0_PG-I", >> + "", >> + "", >> + "", >> + ""; >> + }; >> +}; >> + >> +// I2C6 >> +// Module 0/1 I2C MUX x3 >> +&i2c5 { >> + status = "okay"; >> + clock-frequency = <400000>; >> + multi-master; >> + i2c-scl-clk-low-timeout-us = <32000>; >> + i2c-tck-thddat-config = <0x0099EC00>; >> + >> + i2c-switch@71 { >> + compatible = "nxp,pca9546"; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <0x71>; >> + i2c-mux-idle-disconnect; >> + >> + imux16: i2c@0 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <0>; >> + }; >> + >> + imux17: i2c@1 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <1>; >> + }; >> + >> + imux18: i2c@2 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <2>; >> + }; >> + >> + imux19: i2c@3 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <3>; >> + }; >> + }; >> + >> + i2c-switch@72 { >> + compatible = "nxp,pca9546"; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <0x72>; >> + i2c-mux-idle-disconnect; >> + >> + imux20: i2c@0 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <0>; >> + }; >> + >> + imux21: i2c@1 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <1>; >> + }; >> + >> + imux22: i2c@2 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <2>; >> + }; >> + >> + imux23: i2c@3 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <3>; >> + }; >> + }; >> + >> + i2c-switch@73 { >> + compatible = "nxp,pca9546"; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <0x73>; >> + i2c-mux-idle-disconnect; >> + >> + imux24: i2c@0 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <0>; >> + }; >> + >> + imux25: i2c@1 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <1>; >> + }; >> + >> + imux26: i2c@2 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <2>; >> + }; >> + >> + imux27: i2c@3 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <3>; >> + }; >> + }; >> + >> + //A MUX for a riser with a secondary M.2 installed. > > Add a space. > Sure, will fix. >> + i2c-switch@74 { >> + compatible = "nxp,pca9546"; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <0x74>; >> + i2c-mux-idle-disconnect; >> + >> + i2c5mux0: i2c@0 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <0>; >> + }; >> + >> + //Optional/secondary M.2 drive slot > > Ditto. > Sure, will fix. >> + m2riser: i2c@1 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <1>; >> + }; >> + >> + i2c5mux2: i2c@2 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <2>; >> + }; >> + >> + i2c5mux3: i2c@3 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <3>; >> + }; >> + }; >> + >> + i2c-switch@75 { >> + compatible = "nxp,pca9546"; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <0x75>; >> + i2c-mux-idle-disconnect; >> + >> + imux28: i2c@0 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <0>; >> + }; >> + >> + imux29: i2c@1 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <1>; >> + }; >> + >> + imux30: i2c@2 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <2>; >> + }; >> + >> + imux31: i2c@3 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <3>; >> + }; >> + }; >> + >> + i2c-switch@76 { >> + compatible = "nxp,pca9546"; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <0x76>; >> + i2c-mux-idle-disconnect; >> + >> + imux32: i2c@0 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <0>; >> + }; >> + >> + imux33: i2c@1 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <1>; >> + }; >> + >> + imux34: i2c@2 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <2>; >> + }; >> + >> + imux35: i2c@3 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <3>; >> + }; >> + }; >> + >> + i2c-switch@77 { >> + compatible = "nxp,pca9546"; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <0x77>; >> + i2c-mux-idle-disconnect; >> + >> + imux36: i2c@0 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <0>; >> + }; >> + >> + imux37: i2c@1 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <1>; >> + }; >> + >> + imux38: i2c@2 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <2>; >> + }; >> + >> + imux39: i2c@3 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <3>; >> + }; >> + }; >> +}; >> + >> +// I2C7 >> +// Module 0/1 Leak Sensors >> +// Module 0/1 Fan Controllers >> +&i2c6 { >> + status = "okay"; >> + clock-frequency = <400000>; >> + i2c-tck-thddat-config = <0x0099EC00>; >> + hsc@12 { >> + compatible = "ti,lm5066i"; >> + reg = <0x12>; >> + shunt-resistor-micro-ohms = <190>; >> + status = "okay"; >> + }; >> + hsc@14 { >> + compatible = "ti,lm5066i"; >> + reg = <0x14>; >> + shunt-resistor-micro-ohms = <190>; >> + status = "okay"; >> + }; >> + max31790_1 { >> + compatible = "maxim,max31790"; >> + reg = <0x20>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + }; >> + max31790_2 { >> + compatible = "maxim,max31790"; >> + reg = <0x23>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + }; >> + max31790_3 { >> + compatible = "maxim,max31790"; >> + reg = <0x2c>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + }; >> + max31790_4 { >> + compatible = "maxim,max31790"; >> + reg = <0x2f>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + }; >> +}; >> + >> +// I2C9 >> +// M.2 >> +&i2c8 { >> + status = "okay"; >> + clock-frequency = <400000>; >> + multi-master; >> + i2c-scl-clk-low-timeout-us = <32000>; >> + i2c-tck-thddat-config = <0x0099EC00>; >> +}; >> + >> +// I2C10 >> +// HMC IO Expander >> +// Module 0/1 IO Expanders >> +&i2c9 { >> + status = "okay"; >> + clock-frequency = <400000>; >> + i2c-tck-thddat-config = <0x0099EC00>; >> + // Module 0, Expander @0x20 >> + exp0: pca9555@20 { >> + compatible = "nxp,pca9555"; >> + reg = <0x20>; >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + #address-cells = <1>; >> + #size-cells = <0>; >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + interrupt-parent = <&gpio1>; >> + interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>; >> + >> + gpio-line-names = >> + "FPGA_THERM_OVERT_L-I", >> + "FPGA_READY_BMC-I", >> + "HMC_BMC_DETECT-O", >> + "HMC_PGOOD-O", >> + "", >> + "BMC_STBY_CYCLE-O", >> + "FPGA_EROT_FATAL_ERROR_L-I", >> + "WP_HW_EXT_CTRL_L-O", >> + "EROT_FPGA_RST_L-O", >> + "FPGA_EROT_RECOVERY_L-O", >> + "BMC_EROT_FPGA_SPI_MUX_SEL-O", >> + "USB_HUB_RESET_L-O", >> + "NCSI_CS1_SEL-O", >> + "SGPIO_EN_L-O", >> + "B2B_IOEXP_INT_L-I", >> + "I2C_BUS_MUX_RESET_L-O"; >> + }; >> + >> + // Module 1, Expander @0x21 >> + exp1: pca9555@21 { >> + compatible = "nxp,pca9555"; >> + reg = <0x21>; >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + #address-cells = <1>; >> + #size-cells = <0>; >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + interrupt-parent = <&gpio1>; >> + interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>; >> + >> + gpio-line-names = >> + "SEC_FPGA_THERM_OVERT_L-I", >> + "SEC_FPGA_READY_BMC-I", >> + "", >> + "", >> + "", >> + "", >> + "SEC_FPGA_EROT_FATAL_ERROR_L-I", >> + "SEC_WP_HW_EXT_CTRL_L-O", >> + "SEC_EROT_FPGA_RST_L-O", >> + "SEC_FPGA_EROT_RECOVERY_L-O", >> + "SEC_BMC_EROT_FPGA_SPI_MUX_SEL-O", >> + "", >> + "", >> + "", >> + "", >> + "SEC_I2C_BUS_MUX_RESET_L-O"; >> + }; >> + >> + // HMC Expander @0x27 >> + exp2: pca9555@27 { >> + compatible = "nxp,pca9555"; >> + reg = <0x27>; >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + #address-cells = <1>; >> + #size-cells = <0>; >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + interrupt-parent = <&gpio1>; >> + interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>; >> + >> + gpio-line-names = >> + "HMC_PRSNT_L-I", >> + "HMC_READY-I", >> + "HMC_EROT_FATAL_ERROR_L-I", >> + "I2C_MUX_SEL-O", >> + "HMC_EROT_SPI_MUX_SEL-O", >> + "HMC_EROT_RECOVERY_L-O", >> + "HMC_EROT_RST_L-O", >> + "GLOBAL_WP_HMC-O", >> + "FPGA_RST_L-O", >> + "USB2_HUB_RST-O", >> + "CPU_UART_MUX_SEL-O", >> + "", >> + "", >> + "", >> + "", >> + ""; >> + }; >> + // HMC Expander @0x74 >> + exp3: pca9555@74 { >> + compatible = "nxp,pca9555"; >> + reg = <0x74>; >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + interrupt-parent = <&gpio1>; >> + interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>; >> + >> + gpio-line-names = >> + "IOB_PRSNT_L", >> + "IOB_DP_HPD", >> + "IOX_BMC_RESET", >> + "IOB_IOEXP_INT_L", >> + "IOB_UID_LED_L", >> + "IOB_UID_BTN_L", >> + "IOB_SYS_RST_BTN_L", >> + "IOB_PWR_LED_L", >> + "IOB_PWR_BTN_L", >> + "IOB_PHY_RST", >> + "CPLD_JTAG_MUX_SEL", >> + "", >> + "", >> + "", >> + "", >> + ""; >> + }; >> +}; >> + >> +// I2C11 >> +// BMC FRU EEPROM >> +// BMC Temp Sensor >> +&i2c10 { >> + status = "okay"; >> + clock-frequency = <400000>; >> + i2c-tck-thddat-config = <0x0099EC00>; >> + // BMC FRU EEPROM - 256 bytes >> + eeprom@50 { >> + compatible = "atmel,24c02"; >> + reg = <0x50>; >> + pagesize = <8>; >> + }; >> +}; >> + >> +// I2C12 >> +&i2c11 { >> + status = "disabled"; >> +}; >> + >> +// I2C13 >> +&i2c12 { >> + status = "disabled"; >> +}; >> + >> +// I2C14 >> +// Module 0 UPHY3 SMBus >> +&i2c13 { >> + status = "disabled"; >> +}; >> + >> +// I2C15 >> +// Module 1 UPHY3 SMBus >> +&i2c14 { >> + status = "okay"; >> + clock-frequency = <100000>; >> + multi-master; >> + i2c-scl-clk-low-timeout-us = <32000>; >> + i2c-tck-thddat-config = <0x00EFD000>; >> + >> + //E1.S drive slot 0-3 >> + i2c-switch@77 { >> + compatible = "nxp,pca9546"; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <0x77>; >> + i2c-mux-idle-disconnect; >> + >> + e1si2c0: i2c@0 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <0>; >> + }; >> + >> + e1si2c1: i2c@1 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <1>; >> + }; >> + >> + e1si2c2: i2c@2 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <2>; >> + }; >> + >> + e1si2c3: i2c@3 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <3>; >> + }; >> + }; >> +}; >> + >> +// I2C16 >> +&i2c15 { >> + status = "okay"; >> + clock-frequency = <100000>; >> + multi-master; >> + i2c-scl-clk-low-timeout-us = <32000>; >> + i2c-tck-thddat-config = <0x00EFD000>; >> + >> + //E1.S drive slot 4-7 >> + i2c-switch@77 { >> + compatible = "nxp,pca9546"; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <0x77>; >> + i2c-mux-idle-disconnect; >> + >> + e1si2c4: i2c@0 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <0>; >> + }; >> + >> + e1si2c5: i2c@1 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <1>; >> + }; >> + >> + e1si2c6: i2c@2 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <2>; >> + }; >> + >> + e1si2c7: i2c@3 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <3>; >> + }; >> + }; >> +}; >> + >> +// PCIe RC >> +&pcie { >> + status = "okay"; >> + >> + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; >> + >> + pcie_intc0: legacy-interrupt-controller { >> + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; >> + }; >> +}; >> + >> +// Bridge between AHB bus and PCIe RC. > > No dot/period needed at the end. > >> +&h2x { >> + status = "okay"; >> +}; >> + >> +&mctp { >> + status = "okay"; >> +}; >> + >> +&jtag0 { >> + status = "okay"; >> +}; >> + >> +&jtag1 { >> + mux-gpios = <&sgpiom0 41 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; >> + status = "okay"; >> +}; >> + >> +&rng { >> + status = "okay"; >> +}; >> +
