Le 01/04/2024 à 23:23, André Apitzsch via B4 Relay a écrit :
From: André Apitzsch <g...@apitzsch.eu>
Add support for SY7802 flash LED controller. It can support up to 1.8A
flash current.
Signed-off-by: André Apitzsch <g...@apitzsch.eu>
---
drivers/leds/flash/Kconfig | 11 +
drivers/leds/flash/Makefile | 1 +
drivers/leds/flash/leds-sy7802.c | 532 +++++++++++++++++++++++++++++++++++++++
3 files changed, 544 insertions(+)
...
+static int sy7802_led_register(struct device *dev, struct sy7802_led *led,
+ struct device_node *np)
+{
+ struct led_init_data init_data = {};
+ int ret;
+
+ init_data.fwnode = of_fwnode_handle(np);
+
+ ret = devm_led_classdev_flash_register_ext(dev, &led->flash,
&init_data);
+ if (ret) {
+ dev_err(dev, "Couldn't register flash %d\n", led->led_no);
+ return ret;
+ }
+
+ return ret;
Hi,
Nitpick: return 0;
CJ
+}
