Hi Andreas,
thank you very much. Stonith works nicely when doing the 'kill -9 corosync'
tests.
When looking at /var/log/messages I can see entries like
Jun 29 15:12:07 rt-lxcl9a stonith-ng: [12589]: WARN: parse_host_line: Could not
parse (0 0):
I am wondering what causes this warning.
primitive stonith-ilo-rt-lxcl9ar stonith:external/ipmi \
params hostname="rt-lxcl9a" ipaddr="10.13.172.85" userid="stonith"
passwd="XXX" passwd_method="param" interface="lanplus"
primitive stonith-ilo-rt-lxcl9br stonith:external/ipmi \
params hostname="rt-lxcl9b" ipaddr="10.13.172.93" userid="stonith"
passwd="XXX" passwd_method="param" interface="lanplus"
Best regards
Martin Konold
Robert Bosch GmbH
Automotive Electronics
Postfach 13 42
72703 Reutlingen
GERMANY
www.bosch.com
Tel. +49 7121 35 3322
Sitz: Stuttgart, Registergericht: Amtsgericht Stuttgart, HRB 14000;
Aufsichtsratsvorsitzender: Hermann Scholl; Geschäftsführung: Franz Fehrenbach,
Siegfried Dais;
Stefan Asenkerschbaumer, Bernd Bohr, Rudolf Colm, Volkmar Denner, Christoph
Kübel, Uwe Raschke,
Wolf-Henning Scheider, Werner Struth, Peter Tyroller
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Andreas Kurz
Sent: Freitag, 29. Juni 2012 13:06
To: [email protected]
Subject: Re: [Linux-HA] WARNING: Resources violate uniqueness
On 06/29/2012 12:33 PM, EXTERNAL Konold Martin (erfrakon, RtP2/TEF72) wrote:
> Hi,
>
> thanks for the clarification!
>
>>> 1. Why does crm the two distrinct primitives st-ilo-rt-lxcl9ar and
>>> st-ilo-rt-lxcl9br to have different parameters? Is this an error in
>>> stonith:ipmilan?
>
>> yes, this is an error in the metadata of ipmilan ... but you should still be
>> able to commit that configuration.
>
> Yes, the configuration can be commited without problem.
>
>>> 2. Is stonith:ipmilan the correct stonith driver for HP iLo3 (DL380 G7)? If
>>> yes, how to test if it is really working?
>
>> well, I personally prefer external/ipmi ... used it on several management
>> cards including ilos without a problem.
>
> On the commandline I used successfully:
>
> ipmitool -H rt-lxcl9br.de.bosch.com -I lanplus -A PASSWORD -U stonith -P
> somepassword power status.
>
> -l lanplus is mandatory to get it working with iLo3 (Firmware 1.28)
>
> Can I make uses of this command using external/ipmi or is lanplus not
> supported by external/ipmi?
it is supported
>
> When executing
>
> # stonith -t external/ipmi -n
> hostname ipaddr userid passwd interface
interface is the IPMI interface ... lan or lanplus
>
> I cannot see how to configure lanplus.
crm ra info stonith:external/ipmi
Regards,
Andreas
--
Need help with Pacemaker?
http://www.hastexo.com/now
>
> Best regards
>
> Martin Konold
>
> Robert Bosch GmbH
> Automotive Electronics
> Postfach 13 42
> 72703 Reutlingen
> GERMANY
> www.bosch.com
>
> Tel. +49 7121 35 3322
>
> Sitz: Stuttgart, Registergericht: Amtsgericht Stuttgart, HRB 14000;
> Aufsichtsratsvorsitzender: Hermann Scholl; Geschäftsführung: Franz
> Fehrenbach, Siegfried Dais;
> Stefan Asenkerschbaumer, Bernd Bohr, Rudolf Colm, Volkmar Denner, Christoph
> Kübel, Uwe Raschke,
> Wolf-Henning Scheider, Werner Struth, Peter Tyroller
> _______________________________________________
> Linux-HA mailing list
> [email protected]
> http://lists.linux-ha.org/mailman/listinfo/linux-ha
> See also: http://linux-ha.org/ReportingProblems
>
_______________________________________________
Linux-HA mailing list
[email protected]
http://lists.linux-ha.org/mailman/listinfo/linux-ha
See also: http://linux-ha.org/ReportingProblems
