------------------------------ Thanks Nikita, The ipmitool work fine now. The password and user I was given from the person who configured the iLO is not correct. I created a new one and it works fine now.
Message: 4 Date: Fri, 13 Apr 2012 09:52:06 +0200 From: Nikita Michalko <[email protected]> Subject: Re: [Linux-HA] Problem with stonith RA using external/ipmi over lan or lanplus interface To: "General Linux-HA mailing list" <[email protected]> Message-ID: <[email protected]> Content-Type: Text/Plain; charset="iso-8859-1" Hi, > When I tried ipmitool -I lan -U root -H ip -a chassis power cycle. It did not work but it worked with -I open interface. -> it can't work without IP-adr. (ip=?) You must first configure the ipmi( iLO 3) card with ipmitool, e.g.: ipmitool lan print ipmitool lan set 1 ipaddr 10.10.40.48 ipmitool lan set 1 netmask 255.255.255.0 ipmitool lan set 1 defgw ipaddr 10.10.40.1 ipmitool lan set 1 auth ADMIN PASSWORD ipmitool lan set 1 user ... etc -> man ipmitool is your friend ;-) > What should I do to enable lan/lanplus on SUSE 11? Nikita Michalko ------------------------------ _______________________________________________ Linux-HA mailing list [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems End of Linux-HA Digest, Vol 101, Issue 13 ***************************************** _______________________________________________ Linux-HA mailing list [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
