Hello, I have couple of MasterSwitch Plus - AP9225EXP (AP9225 Expansion) and I am trying to add STONITH to my Linux HA setup.
Here is what the setup: http://old.nabble.com/file/p30910792/Linux%2BHA%2B%252B%2BSTONITH.jpg I have broken this project into three stages as follow: At the first stage I successfully connect to the MasterSwitch Plus using minicom via serial port "/dev/ttyS0" and control the status of the outlets. In the second stage, I wish to control the status of individual outlets (ON/OFF) via CLI. When I try to do this using the command: # stonith desklamp apcmaster /dev/ttyS0 apc Unfortunately, I cannot get my desk lamp ON or OFF as the outlet #1 on both MasterSwitch Plus are connected to two different desk lamps. The name of the outlet #1 on both STONITH device are "desklamp" and the password to access the MasterSwitch Plus is also "apc". Can someone ytell me what command I need to issue to get the desk lamps ON/OFF? Thanks s in advance for your help. Avesran -- View this message in context: http://old.nabble.com/Question-on-uasing-a-MasterSwitch-Plus---AP9225EXP-STONITH-Device-tp30910792p30910792.html Sent from the Linux-HA mailing list archive at Nabble.com. _______________________________________________ Linux-HA mailing list [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
