Am Mittwoch, 14. Januar 2009 15:28:55 schrieb Andrew Beekhof: > On Wed, Jan 14, 2009 at 11:24, Michael Schwartzkopff <[email protected]> wrote: > > Hi, > > > > We have a problem with a custom lsb init script. It starts some processes > > in the bachground and return immideately with return code "0" (success). > > Then, to be blunt, its not suitable for clustering. > You said its a custom script right? Why not fix it? > > > But the > > proccess in the background need about 1 min to start, so the status call > > results in "3 (error)" during that minute. After that everything works. > > > > Stop procedure gives the same. > > Even worse! > You can fudge around the startup case with start delay, even then you > could contrive an example where you'll damage the cluster, but the > stop case is a total recipe for disaster. > > > Any solution for this? > > In all seriousness, don't use it in this form. > Have start and stop call the status function in a loop until the > desired state is reached (and increase the timeouts). > > > Is it possible to check "status" only after 120 sek? > > Is the status automatically checked after "start"?
hi, thanks for your hints. That is what we did already: Wrote an improved script and waited with starting and stopping. It seems to work a kind of. Anyone a good RA script for DocumentShare from Xerox? Cheers, -- Dr. Michael Schwartzkopff MultiNET Services GmbH Addresse: Bretonischer Ring 7; 85630 Grasbrunn; Germany Tel: +49 - 89 - 45 69 11 0 Fax: +49 - 89 - 45 69 11 21 mob: +49 - 174 - 343 28 75 mail: [email protected] web: www.multinet.de Sitz der Gesellschaft: 85630 Grasbrunn Registergericht: Amtsgericht München HRB 114375 Geschäftsführer: Günter Jurgeneit, Hubert Martens --- PGP Fingerprint: F919 3919 FF12 ED5A 2801 DEA6 AA77 57A4 EDD8 979B Skype: misch42 _______________________________________________ Linux-HA mailing list [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
