Hi, I have a two node HA cluster and after I start heartbeat on both the nodes, I see a lot of error messages in /var/log/messages (continously of the form):
Jul 12 01:27:43 w2k8-src heartbeat: [5424]: ERROR: MSG[3] : [protocol=1] Jul 12 01:27:43 w2k8-src heartbeat: [5424]: ERROR: MSG[4] : [src=rhel5ha2] Jul 12 01:27:43 w2k8-src heartbeat: [5424]: ERROR: MSG[5] : [(1)srcuuid=0x1a686458(36 27)] Jul 12 01:27:43 w2k8-src heartbeat: [5424]: ERROR: MSG[6] : [seq=ded] Jul 12 01:27:43 w2k8-src heartbeat: [5424]: ERROR: MSG[7] : [hg=8] Jul 12 01:27:43 w2k8-src heartbeat: [5424]: ERROR: MSG[8] : [ts=487b366c] Jul 12 01:27:43 w2k8-src heartbeat: [5424]: ERROR: MSG[9] : [ld=0.70 1.13 1.16 3/220 21421] Jul 12 01:27:43 w2k8-src heartbeat: [5424]: ERROR: MSG[10] : [ttl=4] Jul 12 01:27:43 w2k8-src heartbeat: [5424]: ERROR: MSG[11] : [auth=2 1879ec53] Jul 12 01:27:44 w2k8-src heartbeat: [5424]: ERROR: process_status_message: bad node [rhel5ha1] in message Jul 12 01:27:44 w2k8-src heartbeat: [5424]: ERROR: MSG: Dumping message with 12 fields Jul 12 01:27:44 w2k8-src heartbeat: [5424]: ERROR: MSG[0] : [t=status] Jul 12 01:27:44 w2k8-src heartbeat: [5424]: ERROR: MSG[1] : [st=active] Jul 12 01:27:44 w2k8-src heartbeat: [5424]: ERROR: MSG[2] : [dt=2710] Jul 12 01:27:44 w2k8-src heartbeat: [5424]: ERROR: MSG[3] : [protocol=1] Jul 12 01:27:44 w2k8-src heartbeat: [5424]: ERROR: MSG[4] : [src=rhel5ha1] Jul 12 01:27:44 w2k8-src heartbeat: [5424]: ERROR: MSG[5] : [(1)srcuuid=0x1a686598(36 27)] Jul 12 01:27:44 w2k8-src heartbeat: [5424]: ERROR: MSG[6] : [seq=1092] Jul 12 01:27:44 w2k8-src heartbeat: [5424]: ERROR: MSG[7] : [hg=9] Jul 12 01:27:44 w2k8-src heartbeat: [5424]: ERROR: MSG[8] : [ts=487b0188] Jul 12 01:27:44 w2k8-src heartbeat: [5424]: ERROR: MSG[9] : [ld=0.73 1.20 1.41 2/223 25090] These messages dont affect the functionality of HA itself, i.e everything else seems to work fine, but these messages keep getting written to /var/log/messages almost every second on both the active and passive node. My /etc/ha.d/ha.cnf has the following two nodes defined in the HA configuration which match with the "uname -n" output as recommended: [EMAIL PROTECTED] HA]# cat /etc/ha.d/ha.cf | grep ^"node" node RHEL5HA1 node RHEL5HA2 [EMAIL PROTECTED] HA]# uname -n RHEL5HA1 [EMAIL PROTECTED] HA]# I use the 2.0.8 stable version of the heartbeat rpm's. Can someone please let me know if I'm missing anything in my configuration/installation? Bala _______________________________________________ Linux-HA mailing list [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
