I renew my question as it does not appear on the list
I add some more information.
Le 15/11/2018 à 17:18, Nicolas RENAULT a écrit :
Hi,
we have a problem with a working FAI installation :
FAI 5.7 is used to install ubuntu 16.04 & 18.04 and debian stretch.
fai was made with a debian stretch, but for now it's installed on
debian 5.
works on lot of pc/server :
* install debian stretch
* install ubuntu 16.04 and 18.04
but we received a new model Lenovo M720s Machine Type = 10ST Product
ID = 10STS0KD00.
core i3 8th / 8 Go ram / ssd M2 nvme.
we change bios to use legacy
when we try to install , it's hang at boot (before fai start , it's
during the hardware detection ) , we boot with kernel 4.9.0-8-amd64
(from fai-setup)
we try to install on a working M710s => ok then push the disk on the
M720s ==> it's working (kernel 4.15.0-39-generic x86_64 of ubuntu
after install).
We try add option on boot ( noapic , no lapic, nomodeset , acpi=off ,
...) without success.
the last message on console is " [ 2.XXXXX ] clocksource: switched
to clocksource tsc "
We thinks that this message is good but after that, the boot process
hang. perhaps on disk or others hardware (video /network / ..) detection.
Did Someone as an idea on how we can complete the boot ?
let me known if you want more information.
We try to install an ubuntu 18.04 and just copy kernel (
4.15.0-29-generic)
when we boot the M720s with this kernel the boot continue and then we
have another problem ; on the fai server it mount the nfsroot but in
server log we see crash of nfs and then the /var/lib/fai/config was not
mounted.
at the end of boot , the FAI process don't start ( ko , the config is
not ok ), we can log into the M720s ssh and we can see /dev/nvme0
the fact that the initrd and kernel we used are not generated by
fai-setup is a problem ?
someone knew kernel / nfs options that can avoid crash ?
Regards.
Nicolas
(sorry for bad english )
Regards,
Nicolas
