Hi! Installation goes through but when rebooting the new server the raid device seems not to start (Device with UUID not found). During the installation the raid seems to be installed and started properly.
The installed server will boot to dracut emergency shell, instead of normal Centos shell. The FAI error.log displays only the following lines: dmesg.log:[ 0.000000] tsc: Fast TSC calibration failed dmesg.log:[ 0.424084] HEST: Enabling Firmware First mode for corrected errors. dmesg.log:[ 21.407827] dracut Warning: No carrier detected on interface eth1 dmesg.log:[ 26.454682] dracut Warning: No carrier detected on interface eth1 dmesg.log:[ 27.729976] ipmi_si 00:07: Error clearing flags: cc dmesg.log:[ 570.983549] platform microcode: firmware: failed to load intel-ucode/06-5e-03 (-2) dmesg.log:[ 570.983553] platform microcode: firmware: failed to load intel-ucode/06-5e-03 (-2) dmesg.log:[ 570.983557] platform microcode: firmware: failed to load intel-ucode/06-5e-03 (-2) dmesg.log:[ 570.983561] platform microcode: firmware: failed to load intel-ucode/06-5e-03 (-2) dmesg.log:[ 570.983564] platform microcode: firmware: failed to load intel-ucode/06-5e-03 (-2) dmesg.log:[ 570.983568] platform microcode: firmware: failed to load intel-ucode/06-5e-03 (-2) dmesg.log:[ 570.983571] platform microcode: firmware: failed to load intel-ucode/06-5e-03 (-2) dmesg.log:[ 570.983575] platform microcode: firmware: failed to load intel-ucode/06-5e-03 (-2) fai.log:/sbin/dracut: line 600: cd: /lib/modules: No such file or directory shell.log:error=0; trap 'error=$(($?>$error?$?:$error))' ERR # save maximum error code shell.log:+ trap 'error=$(($?>$error?$?:$error))' ERR shell.log: echo "WARNING: generating initrd with list of drivers failed. Trying without." shell.log:exit $error 2016-08-22 15:07 GMT+03:00 Thomas Lange <la...@informatik.uni-koeln.de>: > >>>>> On Mon, 22 Aug 2016 14:05:05 +0300, Jorma Tolonen < > jorma.tolo...@gmail.com> said: > > > Thanks Thomas for the great software! > You're welcome. > > > I´m struggling with the Centos7 installation with software raid. > Do you have any error messages? > > -- > regards Thomas >
