Oh my god.. what a crap is that.. then they should lock the complete settings.. Cool Frank, thank you!
c > On 26 Jan 2016, at 19:13, Frank Thommen <f.thom...@dkfz-heidelberg.de> wrote: > > Is your VM currently running? stop it and retry. You cannot change settings > while the VM is running > > f. > > > On 01/26/2016 05:47 PM, Christian Linden wrote: >> Adapters 2-4 are grey/inactive.. I can’t enable/configure them =( >> Would need any vboxmanage add nic or similar.. >> >> >> >>> On 26 Jan 2016, at 17:38, Ronald Steele <rste...@adaptivemethods.com >>> <mailto:rste...@adaptivemethods.com>> wrote: >>> >>> In VB, select your fai server VM, the click on “Network”. VB is weird >>> because you have to click on the word “Network”, not on the icon. >>> This brings up the Networking menu. Between the menu bar at the top >>> and the particulars for the interface below is a line of adapters. >>> Just select “Adapter 1”, " Adapter 2” and configure away. >>> Note that you can change the MAC address here also, and for clients it >>> mush match what is in the dhcpd.conf and the boot config file in >>> /srv/tftp/fai/pxelinux.cfg >>> >>>> On Jan 26, 2016, at 11:30 AM, Christian Linden <lindoma...@gmail.com >>>> <mailto:lindoma...@gmail.com>> wrote: >>>> >>>> Thank you all for your replies! =) >>>> >>>> I’m running 5.0.10 r104061 on latest OS X on MacBook Pro. >>>> Everything to see in syslog with -vvvv in the tftp options is >>>> nothing, just the dhcp info. >>>> daemon.log is silent as well. >>>> >>>> I think as well that there’s any conflict regarding the built in tftp >>>> server from vbox. >>>> >>>> But Ron, you are not fitting in the over all experience =) >>>> Prob I have is I just can choose one adapter in this box; there’s no >>>> add option I could see.. any hint? >>>> Adding it on the faiserver or via vbox? >>>> >>>> Thank you! >>>> >>>> Chris >>>> >>>> >>>>> On 26 Jan 2016, at 17:12, Ronald Steele <rste...@adaptivemethods.com >>>>> <mailto:rste...@adaptivemethods.com>> wrote: >>>>> >>>>> I’m working with this setup right now. TFTP seems to be working fine. >>>>> I’m using “Internal Network” for the installation clients. The fai >>>>> server has two networks, the same “Internal Network” to boot the >>>>> clients on and bridged network to get to it from the VB host. >>>>> You MUST have a wired, not WI-FI network because the bridged network >>>>> will not work over WI-FI for most if not all WI-FI chips. I’ve >>>>> never gotten it to work using a NATed network to the host, and I >>>>> don’t know why. >>>>> Also, my VB host is a Mac Mini running the latest OSX. >>>>> Make sure you are running a VB version 5+ as it’s MUCH faster than >>>>> earlier versions. >>>>> >>>>> Host this helps. >>>>> >>>>> Ron >>>>> >>>>> Now is someone could tell me why the client boot fails on the first >>>>> boot from the hard drive, that would be great. >>>>> >>>>> >>>>>> On Jan 26, 2016, at 8:22 AM, Sven Schumacher >>>>>> <schumac...@tfd.uni-hannover.de >>>>>> <mailto:schumac...@tfd.uni-hannover.de>> wrote: >>>>>> >>>>>> You might try to change the type of network card, which is virtually >>>>>> simulated by Virtualbox... >>>>>> >>>>>> Am 26.01.2016 um 14:19 schrieb Christian Linden: >>>>>>> Hi all, >>>>>>> >>>>>>> Thomas went through all steps with me for a couple of days.. and >>>>>>> we both come the conclusion >>>>>>> that Virtual Box must be the culprit. >>>>>>> I’ve a faiserver as guest and want to pxe boot another guest; the >>>>>>> client gets an IP address but not the pxelinux.0 >>>>>>> Connecting locally on the faiserver with a tftp client the >>>>>>> download works, hence the tftp server works. >>>>>>> >>>>>>> Does anyone know about this problem with/among VBox guests among >>>>>>> each other? >>>>>>> >>>>>>> I checked all kinds of network VBox offers: Nat, Nat network, >>>>>>> Internal Network, Bridged.. no way. >>>>>>> >>>>>>> Thanks so much! >>>>>>> >>>>>>> Best, >>>>>>> Chris >>>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> Sven Schumacher - Systemadministrator Tel: (0511)762-2753 >>>>>> Leibniz Universitaet Hannover >>>>>> Institut für Turbomaschinen und Fluid-Dynamik - TFD >>>>>> Appelstraße 9 - 30167 Hannover >>>>>> Institut für Kraftwerkstechnik und Wärmeübertragung - IKW >>>>>> Callinstraße 36 - 30167 Hannover >>>>>> >>>>>> >>>>> >>>> >>> >> > > -- > Frank Thommen | HD-HuB / DKFZ Heidelberg > | f.thom...@dkfz-heidelberg.de > | +49-6221-54-5823 (Mo-Mi) > | +49-6221-42-3562 (Do-Fr) > >
