Hello everyone, just a follow-up. With the help from Kerim I could managed my setup. The disk-label "gpt-bios" will create this special 2MB Bios-Partition at the end of the part-layout. It's not neccessary to define it in the disk_config-File.
So to create my layout as I mention in the first mail my disk_config looks like this now: # <type> <mountpoint> <size> <fs type> <mount options> <misc options> disk_config disk1 disklabel:gpt-bios bootable:3 fstabkey:uuid primary swap 8192 swap rw primary /boot 512 ext4 rw,noatime,errors=remount-ro primary / 15360 ext4 rw,noatime,errors=remount-ro Thanks everyone for helping me out! Best regards, Denny 2015-11-26 18:39 GMT+01:00 Kerim Gueney <kgue...@uni-koeln.de>: > Hey Denny, > > Type 4 is 16-bit FAT (up to 32M), I see there's some Microsoft partitions. > Is the first partition perhaps an MBR that was installed along some > previous Windows installation? I only ever see it when I installed Windows > on my machine prior to Linux. Maybe you could do the following: > > disk_config disk1 disklabel:gpt-bios bootable:1 fstabkey:uuid > primary - 2048 msdos rw # (msdos is fat16) > primary swap 8192 swap rw > primary /boot 512 ext4 rw,noatime,errors=remount-ro > primary / 15360 ext4 rw,noatime,errors=remount-ro > logical - 1- - - > > > Best regards > Kerim > > > > On 26.11.2015 18:14, Denny Bortfeldt wrote: > > Hey Kerim, > > no not really - my disk_config could be/is wrong. > The following schema need to be created by FAI disk_config: > > GPT /dev/sda1 2048 6143 2M BIOS boot partition /dev/sda2 6144 16783359 8G > Linux swap /dev/sda3 16783360 17831935 512M Microsoft basic data /boot > /dev/sda4 17831936 49289215 15G Microsoft basic data / /dev/sda5 49289216 > 7812456414 3.6T Linux LVM > > But here's the problem: I don't know how. > The /dev/sda1 partition don't have got a mount point and is a type "4" in > fdisk/gdisk - so I don't know what I need to write in my disk_config so > that FAI will use "type 4" in partition layout. > /dev/sda2, /dev/sda3 and /dev/sda4 is clear - everything is "primary" and > swap or ext4. > > > So what do I need to enter in my disk_config that the result will look > like: > > /dev/sda1 2048 6143 2M BIOS boot partition > > Thanks in advance :) > > Best regards, > Denny > > 2015-11-26 17:48 GMT+01:00 Kerim Güney <kgue...@uni-koeln.de>: > >> Hi Denny, >> >> there seems to be a mismatch of sorts between your desired schema and >> what you're actually describing. I am going to assume you want an EFI >> partition that you're going to boot off of. >> >> To do so, this should work: >> >> disk_config disk1 disklabel:gpt-bios bootable:1 fstabkey:uuid >> >> primary /boot/efi 2048 vfat rw >> primary swap 8192 swap rw >> primary /boot 512 ext4 rw,noatime,errors=remount-ro >> primary / 15360 ext4 rw,noatime,errors=remount-ro >> logical - 1- - - >> >> >> Best regards >> Kerim >> >> >> On 26/11/15 16:19, Denny Bortfeldt wrote: >> >> Hello everyone, >> >> I'm using FAI 5.0 and need a special partition layout for our centos kvm >> installation. >> >> The partition schema need to be like this: >> >> GPT /dev/sda1 2048 6143 2M BIOS boot partition /dev/sda2 6144 16783359 8G >> Linux swap /dev/sda3 16783360 17831935 512M Microsoft basic data /boot >> /dev/sda4 17831936 49289215 15G Microsoft basic data / /dev/sda5 49289216 >> 7812456414 3.6T Linux LVM >> Unfortunately I'm unable to create /dev/sda1 and /dev/sda5 with the >> disk_config. >> I don't know what "fstype" I have to enter, that FAI will partitionate >> /dev/sda1 to "BIOS boot partition" (fdisk type "4"). >> fstype "efi" and "bios" will run into an error: >> https://data.bortfeldt.net/f/d9b3239df0/ >> My current config_disk-File looks like this: >> # <type> <mountpoint> <size> <fs type> <mount options> <misc options> >> >> disk_config disk1 disklabel:gpt-bios bootable:3 fstabkey:uuid >> >> primary - 2 efi - >> primary swap 8192 swap rw >> primary /boot 512 ext4 rw,noatime,errors=remount-ro >> primary / 15360 ext4 rw,noatime,errors=remount-ro >> logical - 1- - - >> >> >> So is anyone here who can help me out with my disk_configuration so that >> FAI will partitionate like the schema above? >> >> Thanks in advance. >> >> Best regards, >> Denny >> >> >> -- >> Kerim Güney >> >> Institut für Informatik Junior Sysadmin >> Universität zu Köln Lehrstuhl Prof. Dr. M. Jünger >> Weyertal 121 >> 50931 Köln >> >> > >
