Hello,
posting setup-storage relative config:
========
Starting setup-storage 1.7
Using config file: /var/lib/fai/config/disk_config/CENTOS
Creating directory "/run/lock/lvm"
Finding all volume groups
No volume groups found
Executing: parted -s /dev/sda mklabel msdos
Executing: parted -s /dev/sda mkpart primary "ext3" 1048576B 315621375B
Executing: parted -s /dev/sda set 1 boot on
Executing: parted -s /dev/sda mkpart extended "" 315621376B 1199101181951B
Executing: parted -s /dev/sda mkpart logical "" 315622400B 1199101181951B
Executing: mkfs.ext4 /dev/sda1
Executing: parted -s /dev/sda set 5 lvm on
Executing: pvcreate -ff -y /dev/sda5
Executing: vgcreate vg1 /dev/sda5
Executing: vgchange -a y vg1
Executing: lvcreate -n root_ -L 12288 vg1
Executing: mkfs.ext4 /dev/vg1/root_
Executing: lvcreate -n swap -L 4096 vg1
Executing: mkswap /dev/vg1/swap
Executing: lvcreate -n tmp -L 1024 vg1
Executing: mkfs.ext4 /dev/vg1/tmp
Executing: lvcreate -n var -L 1114410.4890332 vg1
Executing: mkfs.ext4 /dev/vg1/var
/dev/sda1 UUID=c6106925-9cef-4478-b350-9469fe95d596
/dev/vg1/var UUID=12938bce-950f-4cda-ab85-85c2e94791b9
/dev/vg1/swap UUID=9abd06ab-8be0-4ad3-906f-135fb6f5755b
/dev/vg1/root_ UUID=6ea314e1-0585-4cde-9cce-43729c87ccfd
/dev/vg1/tmp UUID=90fa6b42-e229-4bed-bd56-4e8644e4e812
Calling task_mountdisks
Enable swap device /dev/vg1/swap
Mounting UUID=6ea314e1-0585-4cde-9cce-43729c87ccfd to /target/
Mounting UUID=c6106925-9cef-4478-b350-9469fe95d596 to /target/boot
Mounting UUID=90fa6b42-e229-4bed-bd56-4e8644e4e812 to /target/tmp
Mounting UUID=12938bce-950f-4cda-ab85-85c2e94791b9 to /target/var
Calling task_extrbase
Unpacking Debian base archive
ftar: extracting /var/lib/fai/config/basefiles/CENTOS7_64.tar.xz to /target/
Ramdisk mounted onto /target/var/lib/rpm
Ramdisk mounted onto /target/var/cache/yum
Calling hook: debconf.CENTOS
debconf.CENTOS OK.
Skiping task_debconf
Calling hook: repository.CENTOS
cp: `/etc/mtab' and `/target/etc/mtab' are the same file
ainsl: appending to /target/etc/hosts: ipreplaced.38 centos.tendo.lt centos
repository.CENTOS FAILED with exit code 1.
Skiping task_repository
Calling hook: updatebase.CENTOS
Updating base
...
best regards,
Antanas Masevicius
TENDO LT
https://tendo.lt
On Thu, Nov 6, 2014 at 3:30 PM, Kerim Güney <kgue...@uni-koeln.de> wrote:
> Hey,
>
> do you have a fai.log you could post?
>
> It might be a setup-storage issue.
>
> Best regards,
> Kerim
>
> 6 Kasım 2014 14:19:47 CET, Antanas Masevicius <
> antanas.masevic...@gmail.com> yazdı:
>
>> Hello,
>>
>> lately i tried installing CENTOS 6 and 7 with LVM partitions:
>>
>> disk_config disk1 bootable:1 fstabkey:uuid
>> primary /boot 300 ext4 rw
>> logical - 0- - -
>>
>> disk_config lvm fstabkey:uuid
>> vg vg1 disk1.5
>> vg1-root_ / 12G ext4 rw,errors=remount-ro
>> vg1-swap swap 4G swap rw
>> vg1-tmp /tmp 1G ext4 rw,nosuid
>> vg1-var /var 30G- ext4 rw
>>
>> but after successful installation, rebooting stops at:
>>
>> dracut-initqueue: Warning: /dev/mapper/vg1-root_ does not exists
>>
>>
>> my soft:
>>
>> dracut 040+1-1
>>
>> dracut-network 040+1-1
>>
>> fai-client 4.3
>>
>> fai-doc 4.3
>>
>> fai-nfsroot 4.3
>>
>> fai-quickstart 4.3
>>
>> fai-server 4.3
>>
>> fai-setup-storage 4.3
>>
>> liblinux-lvm-perl 0.17-2
>>
>> please advice.
>>
>>
>> best regards,
>>
>> Antanas Masevicius
>> TENDO LT
>> https://tendo.lt
>>
>>
> --
> Sent from my phone. Please excuse my brevity.
>
