Hello In Ubuntu 7.10 with kernel 2.6.22-14.47 I installed a Hauppauge HVR 4000. >From http://linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-4000 I made a driver update and a firmware update. In dmesg the card is recognized. In dvbsnoop are the current parameters not found
dvbsnoop -s feinfo -pd 9 dvbsnoop V1.4.00 -- http://dvbsnoop.sourceforge.net/ DEMUX : /dev/dvb/adapter0/demux0 DVR : /dev/dvb/adapter0/dvr0 FRONTEND: /dev/dvb/adapter0/frontend0 --------------------------------------------------------- FrontEnd Info... --------------------------------------------------------- Device: /dev/dvb/adapter0/frontend0 Basic capabilities: Name: "Conexant CX24116/CX24118" Frontend-type: QPSK (DVB-S) Frequency (min): 950.000 MHz Frequency (max): 2150.000 MHz Frequency stepsiz: 1.011 MHz Frequency tolerance: 5000 Symbol rate (min): 1.000000 MSym/s Symbol rate (max): 45.000000 MSym/s Symbol rate tolerance: 0 ppm Notifier delay: 0 ms Frontend capabilities: auto inversion FEC 1/2 FEC 2/3 FEC 3/4 FEC 4/5 FEC 5/6 FEC 6/7 FEC 7/8 FEC AUTO QPSK Current parameters: Error(95): frontend ioctl: Operation not supported following dmesg is the firmware not loaded Is the update procedure from http://linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-4000 correct? Thanks in advance
_______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
