On 21/01/08 08:13, Peter D. wrote: > On Monday 21 January 2008, Bruce Schultz wrote: > >> On 20/01/08 20:47, Peter D. wrote: >> >>> On Sunday 20 January 2008, Jeff Bailes wrote: >>> >>>> Hi, >>>> Back in November, channel Seven changed their fec_hi from 2/3 to 3/4 >>>> causing scans to not pick it up >>>> ( http://www.dba.org.au/index.asp?sectionID=39&newsID=982&display=news >>>> ). The new entry in the au-Melbourne file for channel seven should be: >>>> # Seven >>>> T 177500000 7MHz 3/4 NONE QAM64 8k 1/16 NONE >>>> >>>> I attached the complete updated file anyway. >>>> Jeff >>>> >>> They are a pain. >>> >>> Anyway, according to the web site that you quoted, all tuners that >>> comply with Australian standards will cope without adjustment. >>> Unfortunately not all tuners comply with Australian standards. :-( >>> >>> Presumably all au-tuning_files should have their channel 7 entry >>> updated. Can this be done at the data base end, or do all files have to >>> be re-submitted? Also the GI in Brisbane is noted as changing as well. >>> >> I can confirm that the au-Brisbane scan file needs to change. It works >> now for me with the same channel 7 line that Jeff included above. Scan >> wasn't finding channel 7 without the change. >> > > Did you just change fec_hi, or did you change the Guard Interval as > well? The quoted web page states that the GI is now 1/16. (It is > possible that your card is smart enough to sort out GI by itself, > but not fec_hi.) > Sorry about the belated reply.... Yes, I changed the GI to 1/16.
_______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
