Problem is i can no longer ESTABLISH a lock at all. It simply stays at status 01!
I know ther ewere some Voltage problems with the cards, but it will not lock H or V at all. Any way to what is going on?!?!!? On 1/4/08, Dwaine Garden <[EMAIL PROTECTED]> wrote: > > I'm getting the same results. Working on the digiwave 108g card. So I > bought another card the Digiwave 103g. The existing 103g which has been in > the kernel for a while, is getting the same problem that you are > experiencing. It keeps losing the lock while scanning for channels. > > Must be a patch that was pushed to the kernel v4l/dvb tree. Been smashing > my head against the wall (4 days) until about an hour ago when I started > playing around with the 103g card and getting the same issue. > > I'm running knoppmyth with kernel 2.6.18 with v4l/dvb updates from the > 2.6.22 kernel. The other box is running 2.6.24-0.123.rc6.fc9 with today > v4l/dvb tree from HG. > > Finds the satellites, locks, scan loses lock. > > *Dark Dragon <[EMAIL PROTECTED]>* wrote: > > I have been fiddling with this set up for some time. > I have a Nova-S-Plus in a P4 1.7 running Fedora Core 6 > > When i first got it running everythign worked great. Tried it with 1 lnb. > Got Good Signal, Good Locks and channels Scanned. > The kernel that comes with Fedora Core 6 is 2.6.18-1.2798 > > Apperntly there are problems with diseqc, so i decided before moving to a > deseqc i shouls try upgradeing the kernel. > I tried pulling linux tv hg but it would not compile under that kernel. > > I updated to kernel 2.6.20-1.2948 from the repositories. I noticed after > this kernel was loaded that my card would no longer lock. I saw that the > Signal had fallen, previously grater then ff00 now at 6800 and less.I also > noticed the quality was irratic. > When downgrading to 2.6.18 i found the card would once again lock. > > Fianlly i tried upgrading and pulling the latest HG drivers, but found > myself in the same position. Can some one please shine some light on this. > > DMESG: > Linux video capture interface: v2.00 > cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded > cx88[0]: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S > [card=37,autodetected] > cx88[0]: TV tuner type 4, Radio tuner type -1 > cx88/0: cx2388x v4l2 driver version 0.0.6 loaded > tveeprom 1-0050: Hauppauge model 92001, rev B1B1, serial# 295008 > tveeprom 1-0050: MAC address is 00-0D-FE-04-80-60 > tveeprom 1-0050: tuner model is Conexant_CX24109 (idx 111, type 4) > tveeprom 1-0050: TV standards ATSC/DVB Digital (eeprom 0x80) > tveeprom 1-0050: audio processor is CX883 (idx 32) > tveeprom 1-0050: decoder processor is CX883 (idx 22) > tveeprom 1-0050: has no radio, has IR receiver, has no IR transmitter > cx88[0]: hauppauge eeprom: model=92001 > input: cx88 IR (Hauppauge Nova-S-Plus as /class/input/input3 > cx88[0]/2: cx2388x 8802 Driver Manager > ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 > PCI: setting IRQ 10 as level-triggered > ACPI: PCI Interrupt 0000:00:09.2[A] -> Link [LNKB] -> GSI 10 (level, low) > -> IRQ 10 > cx88[0]/2: found at 0000:00:09.2, rev: 5, irq: 10, latency: 32, mmio: > 0xe3000000 > ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKB] -> GSI 10 (level, low) > -> IRQ 10 > cx88[0]/0: found at 0000:00:09.0, rev: 5, irq: 10, latency: 32, mmio: > 0xe5000000 > cx88[0]/0: registered device video0 [v4l2] > cx88[0]/0: registered device vbi0 > cx88/2: cx2388x dvb driver version 0.0.6 loaded > cx88/2: registering cx8802 driver, type: dvb access: shared > cx88[0]/2: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S > [card=37] > cx88[0]/2: cx2388x based DVB/ATSC card > DVB: registering new adapter (cx88[0]) > DVB: registering frontend 0 (Conexant CX24123/CX24109)... > > LSPCI: > 00:09.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and > Audio Decoder (rev 05) > Subsystem: Hauppauge computer works Inc. Nova-S-Plus DVB-S > Flags: bus master, medium devsel, latency 32, IRQ 10 > Memory at e5000000 (32-bit, non-prefetchable) [size=16M] > Capabilities: [44] Vital Product Data > Capabilities: [4c] Power Management version 2 > 00:09.1 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio > Decoder [Audio Port] (rev 05) > Subsystem: Hauppauge computer works Inc. Unknown device 9202 > Flags: bus master, medium devsel, latency 32, IRQ 10 > Memory at e4000000 (32-bit, non-prefetchable) [size=16M] > Capabilities: [4c] Power Management version 2 > 00:09.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio > Decoder [MPEG Port] (rev 05) > Subsystem: Hauppauge computer works Inc. Unknown device 9202 > Flags: bus master, medium devsel, latency 32, IRQ 10 > Memory at e3000000 (32-bit, non-prefetchable) [size=16M] > Capabilities: [4c] Power Management version 2 > 00:09.4 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio > Decoder [IR Port] (rev 05) > Subsystem: Hauppauge computer works Inc. Unknown device 9202 > Flags: bus master, medium devsel, latency 32, IRQ 10 > Memory at e2000000 (32-bit, non-prefetchable) [size=16M] > Capabilities: [4c] Power Management version 2 > > > SZAP ATTEMPT > [EMAIL PROTECTED] szap]# ./szap -l DBS CHAN01 > reading channels from file '/root/.szap/channels.conf' > zapping to 151 'CHAN01': > sat 0, frequency = 12442 MHz H, symbolrate 20000000, vpid = 0x1321, apid = > 0x1322 > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > status 01 | signal 6800 | snr a2c2 | ber 00000000 | unc fffffffe | > status 01 | signal 5b00 | snr a2dc | ber 00000000 | unc fffffffe | > status 01 | signal 5b00 | snr a284 | ber 00000000 | unc fffffffe | > status 01 | signal 5b00 | snr a3c0 | ber 00000000 | unc fffffffe | > > _______________________________________________ > linux-dvb mailing list > linux-dvb@linuxtv.org > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > > >
_______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
