joep admiraal schreef:
Hello Michel,
Thank you for the mini howto.
I have downloaded the kernel-source and applied the patches you have
described.
Now when I do a make menuconfig I can select the mantis device driver.
It then has an M in front of it.
The frontends are selected as loadable modules.
I can not change this.
Then I did a make
This went without problems
Now when I do a make modules_install it does not say anything about mantis,
mb86a16 or cu1216...
When I do a modprobe mantis it gives me:
FATAL: Module mantis not found.
Have you got an idea about what I'm doing wrong?
thanx,
Joep
Joep,
Try the following command: find /lib/modules/ -name mantis.ko
This should tell you if the modules have been installed.
If not did you boot the new kernel?
If not please do the following:
Copy the file <path to kernel source tree>/arch/i386/boot/bzImage to
/boot/vmlinuz-<kernel version> for 32-bit platform or
<path to kernel source tree>/arch/x86_64/boot/bzImage to
/boot/vmlinuz-<kernel version> for 64-bit.
do a: mkinitrd /boot/initrd-<kernel version>.img <kernel version>
for example: mkinitrd /boot/initrd-2.6.21.1.img 2.6.21.1
Edit your bootloader config file. For grub on Fedora this is in
/boot/grub/grub.conf
Add a new bootloader config part. On Fedora something like:
title Fedora Core (2.6.21.1)
root (hd0,0)
kernel /vmlinuz-2.6.21.1 ro root=/dev/VolGroup00/LogVol00 rhgb quiet
initrd /initrd-2.6.21.1.img
Reboot your system and when the bootloader appears selected the right
kernel to boot.
After the boot check the output for the dmesg command.
Regards,
Michel.
Op donderdag 3 mei 2007 07:48, schreef Michel Verbraak:
joep admiraal schreef:
Hello,
I downloaded the mantis file from
http://jusst.de/manu/mantis-v4l-dvb.tar.bz2. and used Marko's patch.
I can watch FTA channels.
The next step is to get my hauppauge 350 working again.
It worked fine with ivtv 10.1 but since I installed v4l-dvb it doesn't
work anymore.
I also downloaded the latest v4l-dvb from cvs.
It appears that ivtv is merged into v4l-dvb.
When I install that one ivtv is also working.
However there's no mantis driver in that one.
So now I have 2 versions of v4l-dvb.
One with support for the 1034 and the other one with support for the
hauppauge 350.
Can someone please tell me how I can use both cards at the same time?
b.t.w.
Great you are all still working on the mantis driver.
Can't wait to try the CI when it's ready :)
Thanx,
Joep
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Joep,
Have a look at my mini howto
http://www.verbraak.org/wiki/index.php/Linux_Mantis_driver
In this I explain how I did it.
Regards,
Michel.
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
