Hi All,
I got a new Leadtek WinFast DTV Dongle which looks like the previous, but HAS
DIFFERENT ID AND DOESN'T WORK WITH CURRENT DRIVER.
I tried to patch drivers to load firmware (change id in v4l/dvb-usb-ids.h),
but without success:
usb 1-2: new high speed USB device using ehci_hcd and address 6
usb 1-2: configuration #1 chosen from 1 choice
dvb-usb: found a 'Leadtek - USB2.0 Winfast DTV dongle' in cold state, will try
to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-dibusb-6.0.0.8.fw'
dvb-usb: could not stop the USB controller CPU.
dvb-usb: error while transferring firmware (transferred size: -32, block size:
10)
dvb-usb: firmware download failed at 15 with -22
dvb_usb_dibusb_mc: probe of 1-2:1.0 failed with error -22
usbcore: registered new driver dvb_usb_dibusb_mc
-----------------------
Bus 001 Device 006: ID 0413:6f00 Leadtek Research, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0413 Leadtek Research, Inc.
idProduct 0x6f00
bcdDevice 1.00
iManufacturer 1 DIBCOM
iProduct 2 STK7700
iSerial 3 0000000001
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 46
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
Any help is VERY needed!
Thanks a lot
Michal
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
