I used the following scan file to scan for HDTV signals
T 554000000 8MHz 2/3 1/2 QPSK 8k 1/32 NONE It is not working anymore now, but instead I use T 554000000 8MHz 2/3 1/2 QAM_64 8k 1/32 NONE (which btw does not give any more the full list) I'm not sure what is the problem, maybe is the card. Anyway, those are the channels I could scan BBC HD1a:554000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:1502:1505:36932 BBC HD1b:554167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:1502:1505:36932 ITV HD Triala:522167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QPSK:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:161:162:41029 Ch4 HD Triala:522167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QPSK:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:181:182:41152 five HD Triala:522167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QPSK:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:201:202:41168 ITV HD Trialb:522000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:161:162:41029 Ch4 HD Trialb:522000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:181:182:41152 five HD Trialb:522000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:201:202:41168 You need to manually set the video pid since it is not MPEG2 but H262 and scan does not like it. If you read the mailing list in the last 4/5 months you should find somehting on how to play those signals. MPlayer is fooled by the fact that the video is not MPEG2 but H262 (which it does not expects), there was a patch to manually specify the codec. _______________________________________________ linux-dvb mailing list [email protected] http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
