Good day to Everyone.
I have a problem with the TT S-1401 card. It seems, it cannot talk to diseqc
switch correctly under Linux. I am sure the problem is local to Linux code, for
i have it working in XP.
I have the card connected to LNB0: Eutelsat-21.5E and LNB1:Hotbird.
Scanning of LNB0:
# scan -s 0 Eutelsat-21.5E
is successful.
When I try to scan Hotbird, i get
# scan -s 1 Hotburd-13.0E
scanning Hotburd-13.0E
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 12597000 V 27500000 3
>>> tune to: 12597:v:1:27500
WARNING: >>> tuning failed!!!
>>> tune to: 12597:v:1:27500 (tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.
I am sure that the signal from HB is OK, because i tried to scan it while
connected directly (w/o diseqc), and it was all right.
I have Mercurial drivers 15d2ed3a6af2 installed.
My dmesg:
PCI: Enabling device 0000:00:0b.0 (0004 -> 0006)
ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 169
saa7146: found saa7146 @ mem f8884000 (revision 1, irq 169) (0x13c2,0x1018).
saa7146 (0): dma buffer size 192512
DVB: registering new adapter (TT-Budget-S-1401 PCI).
adapter has MAC addr = XX:XX:XX:XX:XX:XX
DVB: registering frontend 0 (Philips TDA10086 DVB-S)...
lsmod on this subject:
tda826x 3332 1
tda10086 8388 1
budget 11264 0
budget_core 10116 1 budget
saa7146 16392 2 budget,budget_core
ttpci_eeprom 2176 1 budget_core
dvb_core 71400 2 budget,budget_core
i2c_core 19536 13 lirc_i2c,eeprom,asb100,
i2c_viapro,lnbp21,tda826x,tda10086,
tuner,budget,budget_core,ttpci_eeprom,
saa7134,ir_kbd_i2c
Can somebody help? Appreciate any suggestions.
Regards,
Yuri.
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
