Hello Klaus, Klaus Schmidinger wrote: > ---8<-----8<-----8<-----8<-----8<-----8<-----8<-----8<-----8<-----8<--- > > S19.2E 11700 V 9750 v [E0 10 38 F0] W100 [E0 10 38 F0] > > S19.2E 99999 V 10600 v [E0 10 38 F0] W100 [E0 10 38 F1] > > S19.2E 11700 H 9750 v [E0 10 38 F0] W100 [E0 10 38 F2] > > S19.2E 99999 H 10600 v [E0 10 38 F0] W100 [E0 10 38 F3] > > > > S21.5E 11700 V 9750 v [E0 10 38 F8] W100 [E0 10 38 F0] > > S21.5E 99999 V 10600 v [E0 10 38 F8] W100 [E0 10 38 F1] > > S21.5E 11700 H 9750 v [E0 10 38 F8] W100 [E0 10 38 F2] > > S21.5E 99999 H 10600 v [E0 10 38 F8] W100 [E0 10 38 F3] > > But wouldn't this mean that, if Switch 1 is currently at ZF 2 and I want to > tune to a channel on ZF 3, the following would happen: > > - The first sequence of E0 10 38 F0 goes to the relay as well as Switch 1, > so the relay switches to Switch 1 (which it already was, so no change), > and Switch 1 will switch to ZF 0 (which is not what I want). > - The second sequence of E0 10 38 F2 also goes to the relay as well as Switch 1. > For the relay there is no change, because F0..F7 all mean "Switch 1". > The Switch 1 however now switches to ZF 3. > > So, unless I'm missing something, with your setup the switch would go > through extra stages that are not intended. > > Besides, wouldn't a sequence of [E0 10 38 F8] W100 [E0 10 38 F3] first switch > the relay into "Option B" (F8) and then back to "Option A" (F3)? After all, > _all_ DiSEqC sequences go to both the relay _and_ the switch. The repeating > is only done because the switch might have to power up if the relay newly > switches to it in order to actually see the (second) sequence. AFAIK it is > not so that the first sequence goes only to the relay and the second one > only to the switch.
Oops, of course you are right, because off all the guessing of your hardware I had mainly this setup with a mini-DiSEqC relay in mind: S19.2E 11700 V 9750 v A W100 [E0 10 38 F0] S19.2E 99999 V 10600 v A W100 [E0 10 38 F1] S19.2E 11700 H 9750 v A W100 [E0 10 38 F2] S19.2E 99999 H 10600 v A W100 [E0 10 38 F3] S21.5E 11700 V 9750 v B W100 [E0 10 38 F0] S21.5E 99999 V 10600 v B W100 [E0 10 38 F1] S21.5E 11700 H 9750 v B W100 [E0 10 38 F2] S21.5E 99999 H 10600 v B W100 [E0 10 38 F3] In the mail I changed some items without a deper thought about a real DiSEqC relay. Sorry for the confusion. Tjuess Heino -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
