I have also a DVB-S fullfeatured 1.3 card and use the drivers 1.0.0, 1.0.1, 1.1.0 and curently 1.1.1. They all work with DiSEqE without any problems.
This are my DiSEqC parameters
S19.2E 11700 V 9750 v [E0 10 38 F0] S19.2E 99999 V 10600 v [E0 10 38 F1] S19.2E 11700 H 9750 v [E0 10 38 F2] S19.2E 99999 H 10600 v [E0 10 38 F3]
S13.0E 11700 V 9750 v [E0 10 38 F4] S13.0E 99999 V 10600 v [E0 10 38 F5] S13.0E 11700 H 9750 v [E0 10 38 F6] S13.0E 99999 H 10600 v [E0 10 38 F7] ^ this is nessesary for the power supply of the LNBs if there is no externel powersource. In my case it takes the multiswitch out of standby.
This was an important hint, because I also have a diseq 2.0 compliant multiswitch, but _with_ external powersource.
See the results:
This config worked all the years and with my modified alps_bsvr2 frontend code, but not with the original ves1x93 frontend code in the latest driver
S13E 11700 V 9750 [E0 10 38 F0] W15 [E1 10 38 F0] S13E 99999 V 10600 [E0 10 38 F1] W15 [E1 10 38 F1] S13E 11700 H 9750 [E0 10 38 F2] W15 [E1 10 38 F2] S13E 99999 H 10600 [E0 10 38 F3] W15 [E1 10 38 F3] S19.2E 11700 V 9750 [E0 10 38 F4] W15 [E1 10 38 F4] S19.2E 99999 V 10600 [E0 10 38 F5] W15 [E1 10 38 F5] S19.2E 11700 H 9750 [E0 10 38 F6] W15 [E1 10 38 F6] S19.2E 99999 H 10600 [E0 10 38 F7] W15 [E1 10 38 F7]
The two combinations below are working with the _unmodified_ ves1x93 code and also with my alps_bsvr2 mod.
S13E 11700 V 9750 v [E0 10 38 F0] S13E 99999 V 10600 v [E0 10 38 F1] S13E 11700 H 9750 v [E0 10 38 F2] S13E 99999 H 10600 v [E0 10 38 F3] S19.2E 11700 V 9750 v [E0 10 38 F4] S19.2E 99999 V 10600 v [E0 10 38 F5] S19.2E 11700 H 9750 v [E0 10 38 F6] S19.2E 99999 H 10600 v [E0 10 38 F7]
S13E 11700 V 9750 v [E0 10 38 F0] [E1 10 38 F0] [E1 10 38 F0] S13E 99999 V 10600 v [E0 10 38 F1] [E1 10 38 F1] [E1 10 38 F1] S13E 11700 H 9750 v [E0 10 38 F2] [E1 10 38 F2] [E1 10 38 F2] S13E 99999 H 10600 v [E0 10 38 F3] [E1 10 38 F3] [E1 10 38 F3] S19.2E 11700 V 9750 v [E0 10 38 F4] [E1 10 38 F4] [E1 10 38 F4] S19.2E 99999 V 10600 v [E0 10 38 F5] [E1 10 38 F5] [E1 10 38 F5] S19.2E 11700 H 9750 v [E0 10 38 F6] [E1 10 38 F6] [E1 10 38 F6] S19.2E 99999 H 10600 v [E0 10 38 F7] [E1 10 38 F7] [E1 10 38 F7]
@Andrew: Thanks for code-digging that much. Do you understand the difference?
BTW. I also have the "dd"-revision (in both cards)
Alfred
-- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
