On Mon, Sep 23, 2019 at 12:59:31PM +0200, Lukas Zapletal wrote: > It's been a while since the k10temp documentation has been updated. > There are new CPU families supported as well as Tdie temp was added. > This patch adds all missing families which I was able to find from git > history and provides more info about Tctl vs Tdie exported temps. > > Signed-off-by: Lukas Zapletal <lzap+...@redhat.com>
Applied. Thanks, Guenter > --- > Documentation/hwmon/k10temp.rst | 17 ++++++++++++++++- > 1 file changed, 16 insertions(+), 1 deletion(-) > > diff --git a/Documentation/hwmon/k10temp.rst b/Documentation/hwmon/k10temp.rst > index 12a86ba17de9..fc9d2a5ad57d 100644 > --- a/Documentation/hwmon/k10temp.rst > +++ b/Documentation/hwmon/k10temp.rst > @@ -21,10 +21,16 @@ Supported chips: > > * AMD Family 14h processors: "Brazos" (C/E/G/Z-Series) > > -* AMD Family 15h processors: "Bulldozer" (FX-Series), "Trinity", "Kaveri", > "Carrizo" > +* AMD Family 15h processors: "Bulldozer" (FX-Series), "Trinity", "Kaveri", > "Carrizo", "Stoney Ridge", "Bristol Ridge" > > * AMD Family 16h processors: "Kabini", "Mullins" > > +* AMD Family 17h processors: "Zen", "Zen 2" > + > +* AMD Family 18h processors: "Hygon Dhyana" > + > +* AMD Family 19h processors: "Zen 3" > + > Prefix: 'k10temp' > > Addresses scanned: PCI space > @@ -110,3 +116,12 @@ The maximum value for Tctl is available in the file > temp1_max. > If the BIOS has enabled hardware temperature control, the threshold at > which the processor will throttle itself to avoid damage is available in > temp1_crit and temp1_crit_hyst. > + > +On some AMD CPUs, there is a difference between the die temperature (Tdie) > and > +the reported temperature (Tctl). Tdie is the real measured temperature, and > +Tctl is used for fan control. While Tctl is always available as temp1_input, > +the driver exports Tdie temperature as temp2_input for those CPUs which > support > +it. > + > +Models from 17h family report relative temperature, the driver aims to > +compensate and report the real temperature.
