Hi, Anson,

We're missing ACK from the maintainers for patch 4/5 and 5/5, if we
want to shipped the patch via thermal tree.

For patch 2/5, as it introduces a new API for OF_THERMAL, I'd like to
get Eduardo' feedback before taking them.

thanks,
rui

On Wed, 2019-07-24 at 03:16 +0000, Anson Huang wrote:
> Ping...
> 
> > Hi, Daniel/Rui/Eduardo
> >     Could you please take a look at this patch series?
> > 
> > Anson
> > 
> > > From: Anson Huang <anson.hu...@nxp.com>
> > > 
> > > NXP i.MX8QXP is an ARMv8 SoC with a Cortex-M4 core inside as
> > > system
> > > controller, the system controller is in charge of system power,
> > > clock
> > > and thermal sensors etc. management, Linux kernel has to
> > > communicate
> > > with system controller via MU (message unit) IPC to get
> > > temperature
> > > from thermal sensors, this patch adds binding doc for i.MX system
> > > controller thermal driver.
> > > 
> > > Signed-off-by: Anson Huang <anson.hu...@nxp.com>
> > > Reviewed-by: Rob Herring <r...@kernel.org>
> > > Reviewed-by: Dong Aisheng <aisheng.d...@nxp.com>
> > > ---
> > > No change.
> > > ---
> > >  .../devicetree/bindings/arm/freescale/fsl,scu.txt        | 16
> > 
> > ++++++++++++++++
> > >  1 file changed, 16 insertions(+)
> > > 
> > > diff --git
> > > a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> > > b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> > > index a575e42..fc3844e 100644
> > > --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> > > +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> > > @@ -155,6 +155,17 @@ Required properties:
> > >  Optional properties:
> > >  - timeout-sec: contains the watchdog timeout in seconds.
> > > 
> > > +Thermal bindings based on SCU Message Protocol
> > > +------------------------------------------------------------
> > > +
> > > +Required properties:
> > > +- compatible:                    Should be :
> > > +                           "fsl,imx8qxp-sc-thermal"
> > > +                         followed by "fsl,imx-sc-thermal";
> > > +
> > > +- #thermal-sensor-cells: See
> > > Documentation/devicetree/bindings/thermal/thermal.txt
> > > +                         for a description.
> > > +
> > >  Example (imx8qxp):
> > >  -------------
> > >  aliases {
> > > @@ -222,6 +233,11 @@ firmware {
> > >                   compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-
> > > wdt";
> > >                   timeout-sec = <60>;
> > >           };
> > > +
> > > +         tsens: thermal-sensor {
> > > +                 compatible = "fsl,imx8qxp-sc-thermal",
> > > "fsl,imx-sc-
> > > thermal";
> > > +                 #thermal-sensor-cells = <1>;
> > > +         };
> > >   };
> > >  };
> > > 
> > > --
> > > 2.7.4
> 
> 

Reply via email to