Hi Eduardo & Rui, > From: Anson Huang > Sent: Tuesday, June 11, 2019 8:37 PM > > > From: Aisheng Dong > > Sent: Tuesday, June 11, 2019 7:47 PM > > Subject: RE: [PATCH V14 2/5] thermal: of-thermal: add API for getting > > sensor ID from DT > > > > Hi Anson, > > > > The implementation looks good to me. > > A few minor comments on the doc: > > This patch is pending for so long and even till now I am NOT sure if everyone > is > OK for this change, so I will wait for some comments if there is any, and will > improve the doc together in next version. >
The API change seems good to me. But since this is a core changes, we need your inputs to confirm whether this approach is ok to you. So please tell us whether you're fine with this approach. Regards Dong Aisheng > Thanks, > Anson > > > > > > From: anson.hu...@nxp.com [mailto:anson.hu...@nxp.com] > > > Sent: Monday, June 10, 2019 10:53 AM > > > > > > On some platforms like i.MX8QXP, the thermal driver needs a real HW > > > sensor ID from DT thermal zone, the HW sensor ID is used to get > > > temperature from SCU firmware, and the virtual sensor ID starting > > > from > > > 0 to N is NOT used at all, > > > > This API is unware of HW ID or Virtual ID. So we probably no need to > > mention It here. > > > > > this patch adds new API thermal_zone_of_get_sensor_id() to provide > > > the feature of getting sensor ID from DT thermal zone's node. > > > > > > > "It's useful for thermal driver to register the specific thermal zone > > devices from DT in a common way." > > > > > Signed-off-by: Anson Huang <anson.hu...@nxp.com> > > > --- > > > Changes since V13: > > > - add new API into the thermal API doc. > > > --- > > > Documentation/thermal/sysfs-api.txt | 8 +++++ > > > drivers/thermal/of-thermal.c | 66 > > > ++++++++++++++++++++++++++++--------- > > > include/linux/thermal.h | 10 ++++++ > > > 3 files changed, 68 insertions(+), 16 deletions(-) > > > > > > diff --git a/Documentation/thermal/sysfs-api.txt > > > b/Documentation/thermal/sysfs-api.txt > > > index c3fa500..8d7f1b1 100644 > > > --- a/Documentation/thermal/sysfs-api.txt > > > +++ b/Documentation/thermal/sysfs-api.txt > > > @@ -159,6 +159,14 @@ temperature) and throttle appropriate devices. > > > for the thermal zone device, which might be useful for platform > > > drivers for temperature calculations. > > > > > > +1.1.9 int thermal_zone_of_get_sensor_id(struct device_node *tz_np, > > > + struct device_node *sensor_np, > > > + u32 *id) > > > + > > > + This interface is used to get the sensor id from thermal sensor's > > > + phandle argument, it might be necessary for some platforms which > > > + have specific sensor ID rather than virtual ID from 0 - N. > > > > Does below one look better? > > > > "This interface is used to get the sensor id from the given thermal > > zone in DT, which might be useful for thermal drivers to register > > specific thermal zone device in a common way." > > > > > + > > > 1.2 thermal cooling device interface > > > 1.2.1 struct thermal_cooling_device > > > *thermal_cooling_device_register(char > > > *name, > > > void *devdata, struct thermal_cooling_device_ops *) diff --git > > > a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c index > > > dc5093b..a53792b 100644 > > > --- a/drivers/thermal/of-thermal.c > > > +++ b/drivers/thermal/of-thermal.c > > > @@ -449,6 +449,54 @@ thermal_zone_of_add_sensor(struct device_node > > > *zone, } > > > > > > /** > > > + * thermal_zone_of_get_sensor_id - get sensor ID from a DT thermal > > > + zone > > > + * @tz_np: a valid thermal zone device node. > > > + * @sensor_np: a sensor node of a valid sensor device. > > > + * @id: a sensor ID pointer will be passed back. > > > > the sensor ID returned if success > > > > > + * > > > + * This function will get sensor ID from a given thermal zone node, > > > + use > > > + * "thermal-sensors" as list name, and get sensor ID from first > > > + phandle's > > > + * argument. > > > > "This function will get sensor ID from a given thermal zone node and > > the sensor get must match the temperature providers @sensor_np." > > > > Regards > > Dong Aisheng > > > > > + * > > > + * Return: 0 on success, proper error code otherwise. > > > + */ > > > + > > > +int thermal_zone_of_get_sensor_id(struct device_node *tz_np, > > > + struct device_node *sensor_np, > > > + u32 *id) > > > +{ > > > + struct of_phandle_args sensor_specs; > > > + int ret; > > > + > > > + ret = of_parse_phandle_with_args(tz_np, > > > + "thermal-sensors", > > > + "#thermal-sensor-cells", > > > + 0, > > > + &sensor_specs); > > > + if (ret) > > > + return ret; > > > + > > > + if (sensor_specs.np != sensor_np) { > > > + of_node_put(sensor_specs.np); > > > + return -ENODEV; > > > + } > > > + > > > + if (sensor_specs.args_count >= 1) { > > > + *id = sensor_specs.args[0]; > > > + WARN(sensor_specs.args_count > 1, > > > + "%pOFn: too many cells in sensor specifier %d\n", > > > + sensor_specs.np, sensor_specs.args_count); > > > + } else { > > > + *id = 0; > > > + } > > > + > > > + of_node_put(sensor_specs.np); > > > + > > > + return 0; > > > +} > > > +EXPORT_SYMBOL_GPL(thermal_zone_of_get_sensor_id); > > > + > > > +/** > > > * thermal_zone_of_sensor_register - registers a sensor to a DT > > > thermal > > zone > > > * @dev: a valid struct device pointer of a sensor device. Must contain > > > * a valid .of_node, for the sensor node. > > > @@ -499,36 +547,22 @@ thermal_zone_of_sensor_register(struct device > > > *dev, int sensor_id, void *data, > > > sensor_np = of_node_get(dev->of_node); > > > > > > for_each_available_child_of_node(np, child) { > > > - struct of_phandle_args sensor_specs; > > > int ret, id; > > > > > > /* For now, thermal framework supports only 1 sensor per > > zone */ > > > - ret = of_parse_phandle_with_args(child, "thermal-sensors", > > > - "#thermal-sensor-cells", > > > - 0, &sensor_specs); > > > + ret = thermal_zone_of_get_sensor_id(child, sensor_np, &id); > > > if (ret) > > > continue; > > > > > > - if (sensor_specs.args_count >= 1) { > > > - id = sensor_specs.args[0]; > > > - WARN(sensor_specs.args_count > 1, > > > - "%pOFn: too many cells in sensor specifier %d\n", > > > - sensor_specs.np, sensor_specs.args_count); > > > - } else { > > > - id = 0; > > > - } > > > - > > > - if (sensor_specs.np == sensor_np && id == sensor_id) { > > > + if (id == sensor_id) { > > > tzd = thermal_zone_of_add_sensor(child, sensor_np, > > > data, ops); > > > if (!IS_ERR(tzd)) > > > tzd->ops->set_mode(tzd, > > THERMAL_DEVICE_ENABLED); > > > > > > - of_node_put(sensor_specs.np); > > > of_node_put(child); > > > goto exit; > > > } > > > - of_node_put(sensor_specs.np); > > > } > > > exit: > > > of_node_put(sensor_np); > > > diff --git a/include/linux/thermal.h b/include/linux/thermal.h index > > > 15a4ca5..5edffe6 100644 > > > --- a/include/linux/thermal.h > > > +++ b/include/linux/thermal.h > > > @@ -375,6 +375,9 @@ struct thermal_trip { > > > > > > /* Function declarations */ > > > #ifdef CONFIG_THERMAL_OF > > > +int thermal_zone_of_get_sensor_id(struct device_node *tz_np, > > > + struct device_node *sensor_np, > > > + u32 *id); > > > struct thermal_zone_device * > > > thermal_zone_of_sensor_register(struct device *dev, int id, void *data, > > > const struct thermal_zone_of_device_ops > > *ops); @@ > > > -386,6 +389,13 @@ struct thermal_zone_device > > > *devm_thermal_zone_of_sensor_register( > > > void devm_thermal_zone_of_sensor_unregister(struct device *dev, > > > struct thermal_zone_device *tz); > > #else > > > + > > > +static int thermal_zone_of_get_sensor_id(struct device_node *tz_np, > > > + struct device_node *sensor_np, > > > + u32 *id) > > > +{ > > > + return -ENOENT; > > > +} > > > static inline struct thermal_zone_device * > > > thermal_zone_of_sensor_register(struct device *dev, int id, void *data, > > > const struct thermal_zone_of_device_ops > > *ops) > > > -- > > > 2.7.4
