Signed-off-by: Richard Gong <richard.g...@intel.com>
Signed-off-by: Alan Tull <at...@kernel.org>
---
v7: this patch is added in patch set version 7
v8: no change
v9: add case for COMMAND_RSU_UPDATE at svc_thread_recv_status_ok() at
stratix10-svc.c file
add RSU related definitions at stratix10-smc.h file
v10: s/misc/firmware at commit header
---
drivers/firmware/stratix10-svc.c | 35 +++++++++++++++-
include/linux/firmware/intel/stratix10-smc.h | 47 ++++++++++++++++++++++
.../linux/firmware/intel/stratix10-svc-client.h | 20 ++++++++-
3 files changed, 98 insertions(+), 4 deletions(-)
diff --git a/drivers/firmware/stratix10-svc.c b/drivers/firmware/stratix10-svc.c
index 898e588..ae99221 100644
--- a/drivers/firmware/stratix10-svc.c
+++ b/drivers/firmware/stratix10-svc.c
@@ -34,7 +34,7 @@
* timeout is set to 30 seconds (30 * 1000) at Intel Stratix10 SoC.
*/
#define SVC_NUM_DATA_IN_FIFO 32
-#define SVC_NUM_CHANNEL 1
+#define SVC_NUM_CHANNEL 2
#define FPGA_CONFIG_DATA_CLAIM_TIMEOUT_MS 200
#define FPGA_CONFIG_STATUS_TIMEOUT_SEC 30
@@ -271,7 +271,7 @@ static void svc_thread_cmd_config_status(struct stratix10_svc_controller *ctrl,
* @cb_data: pointer to callback data structure to service client
* @res: result from SMC or HVC call
*
- * Send back the correspond status to the service client (FPGA manager etc).
+ * Send back the correspond status to the service clients.
*/
static void svc_thread_recv_status_ok(struct stratix10_svc_data *p_data,
struct stratix10_svc_cb_data *cb_data,
@@ -295,6 +295,9 @@ static void svc_thread_recv_status_ok(struct
stratix10_svc_data *p_data,
case COMMAND_RECONFIG_STATUS:
cb_data->status = BIT(SVC_STATUS_RECONFIG_COMPLETED);
break;
+ case COMMAND_RSU_UPDATE:
+ cb_data->status = BIT(SVC_STATUS_RSU_OK);
+ break;
default:
pr_warn("it shouldn't happen\n");
break;
@@ -373,6 +376,16 @@ static int svc_normal_to_secure_thread(void *data)
a1 = 0;
a2 = 0;
break;
+ case COMMAND_RSU_STATUS:
+ a0 = INTEL_SIP_SMC_RSU_STATUS;
+ a1 = 0;
+ a2 = 0;
+ break;
+ case COMMAND_RSU_UPDATE:
+ a0 = INTEL_SIP_SMC_RSU_UPDATE;
+ a1 = pdata->arg[0];
+ a2 = 0;
+ break;
default:
pr_warn("it shouldn't happen\n");
break;
@@ -389,6 +402,19 @@ static int svc_normal_to_secure_thread(void *data)
(unsigned int)res.a1, (unsigned int)res.a2);
pr_debug(" res.a3=0x%016x\n", (unsigned int)res.a3);
+ if (pdata->command == COMMAND_RSU_STATUS) {
+ if (res.a0 == INTEL_SIP_SMC_RSU_ERROR)
+ cbdata->status = BIT(SVC_STATUS_RSU_ERROR);
+ else
+ cbdata->status = BIT(SVC_STATUS_RSU_OK);
+
+ cbdata->kaddr1 = &res;
+ cbdata->kaddr2 = NULL;
+ cbdata->kaddr3 = NULL;
+ pdata->chan->scl->receive_cb(pdata->chan->scl, cbdata);
+ continue;
+ }
+
switch (res.a0) {
case INTEL_SIP_SMC_STATUS_OK:
svc_thread_recv_status_ok(pdata, cbdata, res);
@@ -941,6 +967,11 @@ static int stratix10_svc_drv_probe(struct platform_device
*pdev)
chans[0].name = SVC_CLIENT_FPGA;
spin_lock_init(&chans[0].lock);
+ chans[1].scl = NULL;
+ chans[1].ctrl = controller;
+ chans[1].name = SVC_CLIENT_RSU;
+ spin_lock_init(&chans[1].lock);
+
list_add_tail(&controller->node, &svc_ctrl);
platform_set_drvdata(pdev, controller);
diff --git a/include/linux/firmware/intel/stratix10-smc.h b/include/linux/firmware/intel/stratix10-smc.h
index a109e4c..5be5dab 100644
--- a/include/linux/firmware/intel/stratix10-smc.h
+++ b/include/linux/firmware/intel/stratix10-smc.h
@@ -67,6 +67,12 @@
*
* INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR:
* There is error during the FPGA configuration process.
+ *
+ * INTEL_SIP_SMC_REG_ERROR:
+ * There is error during a read or write operation of the protected registers.
+ *
+ * INTEL_SIP_SMC_RSU_ERROR:
+ * There is error during a remote status update.
*/
#define INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION 0xFFFFFFFF
#define INTEL_SIP_SMC_STATUS_OK 0x0
@@ -74,6 +80,7 @@
#define INTEL_SIP_SMC_FPGA_CONFIG_STATUS_REJECTED 0x2
#define INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR 0x4
#define INTEL_SIP_SMC_REG_ERROR 0x5
+#define INTEL_SIP_SMC_RSU_ERROR 0x7
/**
* Request INTEL_SIP_SMC_FPGA_CONFIG_START
@@ -262,4 +269,44 @@
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE)
#define INTEL_SIP_SMC_REG_UPDATE \
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_REG_UPDATE)
+/*
+ * Request INTEL_SIP_SMC_RSU_STATUS
+ *
+ * Request remote status update boot log, call is synchronous.
+ *
+ * Call register usage:
+ * a0 INTEL_SIP_SMC_RSU_STATUS
+ * a1-7 not used
+ *
+ * Return status
+ * a0: Current Image
+ * a1: Last Failing Image
+ * a2: Version | State
+ * a3: Error details | Error location
+ *
+ * Or
+ *
+ * a0: INTEL_SIP_SMC_RSU_ERROR
+ */
+#define INTEL_SIP_SMC_FUNCID_RSU_STATUS 11
+#define INTEL_SIP_SMC_RSU_STATUS \
+ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_STATUS)
+
+/*
+ * Request INTEL_SIP_SMC_RSU_UPDATE
+ *
+ * Request to set the offset of the bitstream to boot after reboot, call
+ * is synchronous.
+ *
+ * Call register usage:
+ * a0 INTEL_SIP_SMC_RSU_UPDATE
+ * a1 64bit physical address of the configuration data memory in flash
+ * a2-7 not used
+ *
+ * Return status
+ * a0 INTEL_SIP_SMC_STATUS_OK
+ */
+#define INTEL_SIP_SMC_FUNCID_RSU_UPDATE 12
+#define INTEL_SIP_SMC_RSU_UPDATE \
+ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_UPDATE)
#endif
diff --git a/include/linux/firmware/intel/stratix10-svc-client.h
b/include/linux/firmware/intel/stratix10-svc-client.h
index f2fda7e..e521f17 100644
--- a/include/linux/firmware/intel/stratix10-svc-client.h
+++ b/include/linux/firmware/intel/stratix10-svc-client.h
@@ -10,8 +10,10 @@
* Service layer driver supports client names
*
* fpga: for FPGA configuration
+ * rsu: for remote status update
*/
#define SVC_CLIENT_FPGA "fpga"
+#define SVC_CLIENT_RSU "rsu"
/**
* Status of the sent command, in bit number
@@ -36,6 +38,9 @@
*
* SVC_COMMAND_STATUS_RECONFIG_ERROR:
* Error encountered during FPGA configuration.
+ *
+ * SVC_STATUS_RSU_OK:
+ * Secure firmware accepts the request of remote status update (RSU).
*/
#define SVC_STATUS_RECONFIG_REQUEST_OK 0
#define SVC_STATUS_RECONFIG_BUFFER_SUBMITTED 1
@@ -43,7 +48,8 @@
#define SVC_STATUS_RECONFIG_COMPLETED 3
#define SVC_STATUS_RECONFIG_BUSY 4
#define SVC_STATUS_RECONFIG_ERROR 5
-
+#define SVC_STATUS_RSU_OK 6
+#define SVC_STATUS_RSU_ERROR 7
/**
* Flag bit for COMMAND_RECONFIG
*
@@ -56,9 +62,11 @@
/**
* Timeout settings for service clients:
* timeout value used in Stratix10 FPGA manager driver.
+ * timeout value used in RSU driver
*/
#define SVC_RECONFIG_REQUEST_TIMEOUT_MS 100
#define SVC_RECONFIG_BUFFER_TIMEOUT_MS 240
+#define SVC_RSU_REQUEST_TIMEOUT_MS 300
struct stratix10_svc_chan;
@@ -81,13 +89,21 @@ struct stratix10_svc_chan;
* @COMMAND_RECONFIG_STATUS: check the status of the configuration, return
* status is SVC_STATUS_RECONFIG_COMPLETED, or SVC_STATUS_RECONFIG_BUSY, or
* SVC_STATUS_RECONFIG_ERROR
+ *
+ * @COMMAND_RSU_STATUS: request remote system update boot log, return status
+ * is log data or SVC_STATUS_RSU_ERROR
+ *
+ * @COMMAND_RSU_UPDATE: set the offset of the bitstream to boot after reboot,
+ * return status is SVC_STATUS_RSU_OK or SVC_STATUS_RSU_ERROR
*/
enum stratix10_svc_command_code {
COMMAND_NOOP = 0,
COMMAND_RECONFIG,
COMMAND_RECONFIG_DATA_SUBMIT,
COMMAND_RECONFIG_DATA_CLAIM,
- COMMAND_RECONFIG_STATUS
+ COMMAND_RECONFIG_STATUS,
+ COMMAND_RSU_STATUS,
+ COMMAND_RSU_UPDATE
};
/**
--
2.7.4
