Document Synopsys DesignWare I3C master module
Signed-off-by: Vitor soares <soa...@synopsys.com>
---
Changes in v2:
-Address the changes in Documentation/devicetree/bindings/i3c/i3c.txt
-Add controller version on compatible string
.../devicetree/bindings/i3c/snps,dw-i3c-master.txt | 42 ++++++++++++++++++++++
1 file changed, 42 insertions(+)
create mode 100755 Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
diff --git a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
new file mode 100755
index 0000000..b930c09
--- /dev/null
+++ b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
@@ -0,0 +1,42 @@
+Bindings for Synopsys DesignWare I3C master block
+=================================================
+
+Required properties:
+--------------------
+- compatible: shall be "snps,dw-i3c-master-1.00a"
+- clocks: shall reference the core_clk
+- interrupts: the interrupt line connected to this I3C master
+- reg: Offset and length of I3C master registers
+
+Mandatory properties defined by the generic binding (see
+Documentation/devicetree/bindings/i3c/i3c.txt for more details):
+
+- #address-cells: shall be set to 3
+- #size-cells: shall be set to 0
+
+Optional properties defined by the generic binding (see
+Documentation/devicetree/bindings/i3c/i3c.txt for more details):
+
+- i2c-scl-hz
+- i3c-scl-hz
+
+I3C device connected on the bus follow the generic description (see
+Documentation/devicetree/bindings/i3c/i3c.txt for more details).
+
+Example:
+
+ i3c-master@2000 {
+ compatible = "snps,dw-i3c-master-1.00a";
+ #address-cells = <3>;
+ #size-cells = <0>;
+ reg = <0x02000 0x1000>;
+ interrupts = <0>;
+ clocks = <&i3cclk>;
+
+ eeprom@57{
+ compatible = "atmel,24c01";
+ reg = < 0x57 0x0 0x10>;
+ pagesize = <0x8>;
+ };
+ };
+
--
2.7.4
