[PATCH 09/11] DT: arm: exynos: add support for thermal trip irq-mode

[Lukasz Luba]

This patch adds support for new flash which indicates
that trip point triggers irq when temperature is met.
Exynos5433 supports 8 trip point which will trigger irq.
Above that number other trip points should be registered
without 'irq-mode' flag.
That will force the thermal framework to start polling
the temperature sensor under configured conditions and
handle the trip point.

Cc: Kukjin Kim <kg...@kernel.org>
Cc: Krzysztof Kozlowski <k...@kernel.org>
Cc: devicet...@vger.kernel.org
Cc: linux-arm-ker...@lists.infradead.org
Signed-off-by: Lukasz Luba <l.l...@partner.samsung.com>
---
 arch/arm/boot/dts/exynos5420-trip-points.dtsi | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5420-trip-points.dtsi 
b/arch/arm/boot/dts/exynos5420-trip-points.dtsi
index a67a3807..9e16970 100644
--- a/arch/arm/boot/dts/exynos5420-trip-points.dtsi
+++ b/arch/arm/boot/dts/exynos5420-trip-points.dtsi
@@ -11,21 +11,25 @@ trips {
        cpu-alert-0 {
                temperature = <85000>; /* millicelsius */
                hysteresis = <10000>; /* millicelsius */
-               type = "active";
+               type = "passive";
+               irq-mode;
        };
        cpu-alert-1 {
                temperature = <103000>; /* millicelsius */
                hysteresis = <10000>; /* millicelsius */
-               type = "active";
+               type = "passive";
+               irq-mode;
        };
        cpu-alert-2 {
                temperature = <110000>; /* millicelsius */
                hysteresis = <10000>; /* millicelsius */
-               type = "active";
+               type = "passive";
+               irq-mode;
        };
        cpu-crit-0 {
                temperature = <120000>; /* millicelsius */
                hysteresis = <0>; /* millicelsius */
                type = "critical";
+               irq-mode;
        };
 };
-- 
2.7.4