This patch adds support for new flash which indicates
that trip point triggers irq when temperature is met.
Exynos5433 supports 8 trip point which will trigger irq.
Above that number other trip points should be registered
without 'irq-mode' flag.
That will force the thermal framework to start polling
the temperature sensor under configured conditions and
handle the trip point.
Cc: Kukjin Kim <kg...@kernel.org>
Cc: Krzysztof Kozlowski <k...@kernel.org>
Cc: devicet...@vger.kernel.org
Cc: linux-arm-ker...@lists.infradead.org
Signed-off-by: Lukasz Luba <l.l...@partner.samsung.com>
---
arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi
b/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi
index d3301b8..39185af 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi
@@ -11,40 +11,48 @@ trips {
temperature = <75000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "passive";
+ irq-mode;
};
cpu-alert-1 {
temperature = <80000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "passive";
+ irq-mode;
};
cpu-alert-2 {
temperature = <85000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "passive";
+ irq-mode;
};
cpu-alert-3 {
temperature = <90000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "passive";
+ irq-mode;
};
cpu-alert-4 {
temperature = <95000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "passive";
+ irq-mode;
};
cpu-alert-5 {
temperature = <100000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "passive";
+ irq-mode;
};
cpu-alert-6 {
temperature = <110000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "passive";
+ irq-mode;
};
cpu-crit-0 {
temperature = <115000>; /* millicelsius */
hysteresis = <0>; /* millicelsius */
type = "critical";
+ irq-mode;
};
};
--
2.7.4
