On Wed, 03 Oct 2018 11:37:17 -0700
Joe Perches <j...@perches.com> wrote:
> On Wed, 2018-10-03 at 15:22 +0200, Boris Brezillon wrote:
> > The reg property of devices connected to an I3C bus have 3 cells, and
> > filling them manually is not trivial. Provides macros to help doing
> > that.
>
> This patch logic seems excessively fragile.
Keep in mind that this header is meant to be include by .dts(i) files,
not regular .c files.
>
> > Signed-off-by: Boris Brezillon <boris.brezil...@bootlin.com>
> > Reviewed-by: Rob Herring <r...@kernel.org>
> > ---
> > Changes in v8:
> > - None
> >
> > Changes in v5:
> > - none
> > ---
> > include/dt-bindings/i3c/i3c.h | 28 ++++++++++++++++++++++++++++
> > 1 file changed, 28 insertions(+)
> > create mode 100644 include/dt-bindings/i3c/i3c.h
> >
> > diff --git a/include/dt-bindings/i3c/i3c.h b/include/dt-bindings/i3c/i3c.h
> > new file mode 100644
> > index 000000000000..97448c546649
> > --- /dev/null
> > +++ b/include/dt-bindings/i3c/i3c.h
> > @@ -0,0 +1,28 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +/*
> > + * Copyright (C) 2017 Cadence Design Systems Inc.
> > + *
> > + * Author: Boris Brezillon <boris.brezil...@bootlin.com>
> > + */
> > +
> > +#ifndef _DT_BINDINGS_I3C_I3C_H
> > +#define _DT_BINDINGS_I3C_I3C_H
> > +
> > +#define IS_I2C_DEV 0x80000000
> > +
> > +#define I2C_DEV(addr, lvr) \
> > + (addr) (IS_I2C_DEV | (lvr)) 0x0
>
> This looks to be missing surrounding parentheses.
Actually it's not. The macro is supposed to declare 3 u32 integers each
of them separated by a space:
reg = <I2C_DEV(0x34, 0x1)>;
is translated into
reg = <0x34 0x80000001 0x0>;
>
> > +
> > +#define I3C_PID(manufid, partid, instid, extrainfo) \
> > + ((manufid) << 1) \
> > + (((partid) << 16) | ((instid) << 12) | (extrainfo))
>
> This macro doesn't make any sense. Missing a shift and an or?
Same here, the PID is taking 2 32-bit entries.
Now, I agree that this is far from obvious, and if Rob is okay, I'd
like to propose a different binding to avoid having to define these
macros:
reg = <i2c_addr_or_i3c_static_addr pid_msb pid_lsb>;
If pid_msb and pid_lsb are 0, then the node is defining an I2C device
(AFAICT, 0 is not a valid PID), otherwise it's an I3C device. This way
we get rid of the IS_I2C_DEV flag, and we can get rid of those macros
without making I3C dev node definition too painful (the only part
developers will have to get right is the PID)
>
> > +
> > +#define I3C_DEV_WITH_STATIC_ADDR(addr, manufid, partid, \
> > + instid, extrainfo) \
> > + (addr) I3C_PID(manufid, partid, instid, extrainfo)
> > +
> > +#define I3C_DEV(manufid, partid, instid, extrainfo) \
> > + I3C_DEV_WITH_STATIC_ADDR(0x0, manufid, partid, \
> > + instid, extrainfo)
> > +
> > +#endif
>
